3″ SpinDrifter Aerated Bottom Drain Kit

Economy Bottom Drains

All Koi ponds should be fitted with bottom drains, and we strongly recommend this.

These economy bottom drains are well made and are suited for use with 110mm or 50mm waste pipe.

We cannot express the importance of installing a bottom drain when planning and building your pond and these drains provide a cost effective way of doing this.

*NOTE: It cannot be used with pressure pipe.

https://youtu.be/4hdSwxpXXo8

4″ SpinDrifter Aerated Bottom Drain Kit

At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website.

3 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

• 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
• 1 x 3mtr 4″ pressure pipe – PW7078
• 1 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)

6 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

• 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
• 2 x 3mtr 4″ pressure pipe – PW7078
• 2 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)
• 1 x 4″ Straight joiner – PW7081 (07190)
• 1 x 1″ Straight joiner – PW7603 (07184)

9 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

• 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
• 3 x 3mtr 4″ pressure pipe – PW7078
• 3 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)
• 2 x 4″ Straight joiner – PW7081 (07190)
• 2 x 1″ Straight joiner – PW7603 (07184)

If it’s for a liner installation then a flange kit is required and can be added to your basket separately .

https://youtu.be/-ZGL-HGBnXI