Amalgam Submersible UV 80 watt

Oase Bitron Premium 180 W UVC

• Powerful, efficient UVC clarifier
• Extremely effective sterilisation thanks to well thought-out flow optimisation
• Extremely easy and flexible installation before or after the filter system

Oase Bitron Premium 180 W UVC Product characteristics:

• 100% protection against eye damage
• Energy efficient thanks to electronic ballast
• Exceptionally effective sterilisation thanks to the long retention time of the water in the Bitron
• Flow-optimised reactor design ensures direct and virtually loss-free UV radiation
• High-quality V4A stainless steel housing for stability and good reflection rates
• Extremely easy installation with stainless steel connection elements
• Flexible connection upstream or downstream of the ProfiClear filter system — as well as for other gravity-fed applications
• In the event of pond enlargements or an increase in fish stock, extension with additional Bitron Premium UVC devices is possible at any time
• Visual function check
• Horizontal or vertical setup possible
• Clear water guarantee when used in conjunction with OASE ProfiClear filters
• Depending on requirements, the Bitron Premium 120 W and 180 W lamps can be switched on individually

• Suitable for ponds up to 280.0 m3

Easy installation
Thanks to stainless steel connection elements.

High quality V4A stainless steel housing
Provides stability and good reflection rates. Can be used even with increased salt content (dry setup).

Flexible installation
Before or after the filter system.

Oase Bitron Eco 180 W UVC

The revolutionary UVC clarifier Bitron Eco with 180 W power removes floating algae and harmful bacteria with maximum efficiency. Thanks to the automatic bypass regulation and the significantly enlarged housing, an optimal irradiation result is always guaranteed, even with changing flow rates of up to 50,000 l / h. The clever eco-control regulates the irradiation time depending on the seasonal needs. This enables energy savings of up to 50% to be achieved! You can also save on the light sources, because the newly developed 60W UVC lamp has a service life of 12,000 hours that is 50% longer. In addition, changing the lamp is now child’s play and without dismantling the quartz glass. The proven automatic cleaning system is also included, an LED UVC control as well as a display for lamp change and water temperature. Thanks to the protection class IP68, the Bitron Eco can be set up directly on or even in the pond. The cable length is 5 m, the nominal voltage 220 – 240/50 Hz. The Bitron Eco enables a 1 1/2 “and 2” connection. Optimal for connection to ProfiClear, BioTec 30, BioTec ScreenMatic 36. You receive a guarantee of 2 years + 1 year requirement guarantee.

• Maximum efficiency, thanks to perfect combination of flow rate and irradiation intensity
• Reduced bulb costs thanks to 50% longer service life (12,000 h)
• Energy costs reduced up to 50% with the same cleaning capacity*

Yamitsu Algae Master Pond UV Clarifier 15W

Yamitsu algae master uv’s are made from UV stabilised materials to ensure a longer life and incorporate turbulators to enhance the unit’s performance. Large inlet and exhaust ports make the algae master uv suitable for a wide range of pond uv applications. It is recommended that the algae master uv should be installed using solid solvent weld pipe.

However, all algae master uv’s come complete with free (glue in) hosetails enabling them to be connected to ½”, ¾”, 1″, 1¼” and 1½” flexible pipe. Algae master uv’s will also fit most popular 1½” household solvent weld waste and pressure pipes.

Yamitsu Algae Master Pond UV Clarifier 15w Installation

If you have a severe algae problem you should effect a partial water change before starting the installation. Yamitsu Algae Master Pond UV can be added to any existing filtration system. For best results algae master units should be fitted in line, after the pump, with water being forced through them. Use the largest size of pipe possible. If hosetails are to be used, it is very important that they are trimmed to the largest possible size that will fit inside the flexible pipe (before glueing in place). This will ensure that the maximum flow rate can be obtained for the size of pipe.

Yamitsu Algae Master UV Maintenance

Although maintenance is minimal all UV lamps need replacing at six monthly intervals. The algae master’s uv lamp may be illuminated and appear to be working but the radiation dosage diminishes with age and is ineffective after six months. Dispose of used uv lamps sensibly. Even exhausted uv lamps should NEVER be looked at directly when illuminated.

As the algae master uv is dependant upon water passing through it, it is important to ensure that any pump strainers, pre-filters or delivery pipes are not blocked or are causing the flow to be restricted.

T5 Submersible 75W UVC

Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss.

Benefits

• These lamps can be used in filter tanks so the water can pass without any resistance/ pressure loss.
• The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in a tank.
• A special tank connector is available for direct installation in i.e. filters.

Note:

• This product is only intended for professional use.
• It should be installed in a professional application or assembled with other appliances.
• Before using this product the installer/user must take care the product complies to the latest European standards for UV-C units.
• 75W Immersion UV-C