Aqua Forte Super-Strong Fix & Seal

PTFE Tape

PTFE Tape Is a must when installing pumps, UVs and any type of threaded pipework fitting for plumbing. PTFE is not suitable for gas. Available in single rolls 12mm x 12m or in packs of 10.

There are four main types of pipe work used on koi ponds:

• Metric Pressure Pipe
• Imperial Pressure Pipe
• Black waste Pipe
• ABS Pipe

The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Cotswold Koi we are looking to bring you a full range of pipe fittings for every occasion.

we are happy to provide assistance, should you need it,  please Contact Us if you need assistance in choosing the right pipe work for your project.

Gold Label Underwater Pond and Aquarium One Shot Sealant:

Gold Label One Shot underwater sealant is ideal for pond and aquarium repairs due its remarkable ability to instantly repair and bond surfaces even while submerged in water. It is easy to use and there is no need to purchase or use a silicone gun. There is no need to remove fish from the water when using Gold Label sealer, it is solvent free and isocyanate free.

This high-quality, heavy-duty sealant is perfect for sticking together a wide variety of materials including, various forms of rubber, vinyl, plastic, ceramic, concrete, wood and much more. This makes Gold Label sealer the best product for pond repair work such as mending pond liner.

For the best results:

• Clean all surfaces so that they are free of grease, algae, etc.
• Distribute the underwater sealer directly onto the surface you wish to bond/seal.
• For bonding where there is movement (expansion and contraction) of different materials leave a minimum 5mm thickness of bead between surfaces.
• For bonding different liners, use 2 beads of sealant 150mm apart and leave to cure for 36 hours
• Gold label Underwater Sealer full cure will take approximately 24 hours, initial tack 2-3 hours and can be painted after 4 hours.
• Where livestock is present, protect from ingestion while curing. Full cure 24 hours. Initial tack 2-3 hours. Sealant will continuously harden for up to 7 days.
• Do not use below 10°c.

Available in Black 80ml foil tubes with trigger nozzle (no silicone gun required)