Cloverleaf Absolute Multi Season Koi Food

Oase ProfiSkim Premium

The Oase ProfiSkim Premium can be used with large filter systems and in shallow water areas. The ProfiSkim Premium has the perfect dimensions for large quantities of water powerfully cleaning pond surfaces of up to 65 m2.

Characteristics:

• Ideal implementation in shallow water zones
• Can be used in gravity-fed operation (DN 110) or pump-fed operation, incl. 2″ (50 mm) adapter
• Water routing for effective suction capacity
• Perfect supplement for filter systems in the gravity fed, as well as the pump fed system
• Large, easy to clean stainless steel basket with 8 mm mesh width

• Powerful suction cleaning of pond surfaces up to 65 m2

• With stable stainless steel base
• On request, a basket with a 2 mm mesh width is available

Firestone Pond liner

Firestone Pond liners EPDM Geomembrane, a high-performing rubber liner

The main component of Firestone Pond liner Systems is Firestone EPDM Geomembrane, a single-ply synthetic rubber waterproofing membrane made of ethylene – propylene – diene terpolymer, mixed with carbon black, oils, curing agents and processing aids. It is calendered into large sheets and vulcanized.

• Key features and benefits
  (The success of Firestone Pond Liner EPDM Geomembranes can be attributed to their unique combination of benefits)
• High flexibility: Firestone Pond Liner, EPDM Geomembranes remain highly flexible even at very low temperatures (down to –45 °C), enabling year round installation in a variety of climates and terrain.
• High elongation: Firestone Pond Liner, EPDM Geomembranes can elongate over 300%, which enables the membrane to stretch and conform to objects in the subgrade.
• Superior weathering resistance: Firestone Pond Liner, EPDM Geomembranes offer unmatched resistance to ultraviolet radiation and ozone.
• Quick and easy installation: Firestone Pond Liner, EPDM Geomembranes are available in large seamless panel sizes up to 15m in width and 61m in length resulting in fewer field seams and less installation time.
• Low maintenance: Firestone Pond Liner, EPDM Geomembranes require little or no regular maintenance after installation. The Geomembrane can survive normal environmental exposure for well over 30 years.
• Environmentally friendly: Firestone Pond Liner, EPDM Geomembrane is an inert material with low environmental impact during production and use. In addition, Firestone’s EPDM manufacturing facilities have received ISO 14001 certification, a testimony of the company’s commitment to environmental management.
• Firestone Pond Liners for garden pond applications

The 1.0 mm thick Firestone Pond Liner, EPDM Geomembrane is specifically designed for decorative pond applications. Because of its specific formulation and production process, the Firestone Pond Liner membrane, as are all of our products, guaranteed to be compatible with aquatic life in accordance with testing reports published by the Water Research Centre in the UK.

Price per square meter

EXAMPLE: If you require an 6m x 4m piece of liner then you require 24 square meters. 24 must be selected from the drop down box. Please also input the dimensions of the liner you require in the notes section which can be found at the checkout page.

Superfish Pond ECO Plus RC 5000

The Superfish Pond ECO Plus RC 5000 Pump is now available with remote control that enables you to easily adjust your pond pump flow capacity.

The remote control enables you to switch your Superfish Pond ECO Plus RC 5000 Pump on/off and set the water flow rate of your Superfish Pond Pump to the required level of flow rate. This is the most economical to run pond pump as the slower the flow rate, the less wattage your pump uses.

These great economic to run, energy efficient Superfish Pond ECO Plus RC 5000 Pumps are suitable for dry-mounting and submerged use.

• High water flow output with an extreme low energy consumption.
• Suitable for both submerged and dry standing usage.
• Run Dry Protection, when there is no water the pump stops automatically.

Run Dry and overload protection

The pump is equipped with Run Dry Protection, 10 seconds after being taken away from water, the water pump will stop to protect it from running dry, it will try to re start after 10 seconds, if without water, it will stop again, this cycle will repeat 5 times, then the pump will stop. To re-start the pump take plug from main and plug back in and ensure pump is working well.

The pump has a thermal overload safety device. In the event of any overheating of the motor, this device automatically switches off the pump. The cooling time is roughly 15 to 20 minutes, then the pump automatically comes on again. If the overload cutout is tripped, it is essential to identify and deal with the cause of the overheating.

Superfish Pond ECO Plus RC 5000 Performance

• 2000 l/h – 0.9m max head – 6 watt
• 2400 l/h – 1.1m max head – 8 watt
• 3000 l/h – 1.4m max head – 10 watt
• 3600 l/h – 1.7m max head – 12 watt
• 4000 l/h – 2.0m max head – 14 watt
• 4300 l/h – 2.3m max head – 16 watt
• 4500 l/h – 2.6m max head – 18 watt
• 4700 l/h – 2.8m max head – 20 watt
• 4850 l/h – 2.9m max head – 21 watt
• 5000 l/h – 3.0m max head – 22 watt

Complete with 2 year manufacturer warranty.

Superfish ECO-plus E 12000

• Flow rate 12000 ltrs an hr.
• 68w Power consumption.
• Pumps large quantities of pond water with very low electricity consumption.
• Superfish ECO-plus E 12000 is for Koi and Fish ponds with low energy consumption.
• The Superfish ECO-plus E 12000 is extremely reliable in operation.

Electronic Filter pump for Koi and fish ponds. The new engine offers very good performance and high head at a very low power consumption (approx. 5 Watt per 1.000 L/h).

A pond pump that truly deserves a “green label”!

Run Dry and overload protection

The Superfish ECO-plus E 12000 pump is equipped with Run Dry Protection, 10 seconds after being taken away from water, the water pump will stop to protect it from running dry, it will try to re start after 10 seconds, if without water, it will stop again, this cycle will repeat 5 times, then the pump will stop. To re-start the pump take plug from main and plug back in and ensure pump is working well.

The pump has a thermal overload safety device. In the event of any overheating of the motor, this device automatically switches off the pump. The cooling time is roughly 15 to 20 minutes, then the pump automatically comes on again. If the overload cutout is tripped, it is essential to identify and deal with the cause of the overheating.