Description
Black Waste End Caps
These Black Waste End Caps should be used in conjunction with Black Waste Solvent Weld Pipe. The Black waste End Caps are used to permanently cap off a plain Black Waste fitting. If capping off Black Waste Solvent Weld Pipe you will need to put a Black Waste Connector onto the Pipe and then insert the Black Waste End Cap. These Black Waste End Caps are available in 4 sizes 110mm,82mm,50mm and 40mm. The 40mm and 50mm are access caps which allow you to unscrew the end.
110mm Black Waste End Cap
- Overall length 555mm
- Overall Width 116mm
- Overall Width of external flange 140mm
82mm Black Waste End Cap
- Overall length
- Overall Width
- Overall Width of external flange
50mm Black Waste End Cap
- Overall length 60mm
- Overall Width 55mm
- Overall Width of external flange 60mm
40mm Black Waste End Cap
- Overall length 40mm
- Overall Width 42mm
- Overall Width of external flange 45mm
At Cotswold Koi we understand The importance of pipe work, mistakes made in pipework are one of the most common we come across and can be very costly and hard to change at a later date.
There are four main types of pipe work used on koi ponds:
- Metric Pressure Pipe
- Imperial Pressure Pipe
- Black waste Pipe
- ABS Pipe
The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Cotswold Koi we are looking to bring you a full range of pipe fittings for every occasion.
we are happy to provide assistance, should you need it, please Contact Us if you need assistance in choosing the right pipe work for your project.
