Home » Shop » Pond Building Supplies » Pond Paint » Impermax Humidity Primer 5kg
humidity-primer-5kg.jpg
  • humidity-primer-5kg.jpg

Impermax Humidity Primer 5kg

£171.99 inc. VAT

Impermax Humidity Primer

It is not recommended to apply Impermax Aqua membrane directly on surfaces which may contain moisture or on damp surfaces, or humidity content, either on the surface or trapped underneath.

Humidity creates two important problems in treatments:

  • Lack of adhesion.
  • The appearance of blisters in the surface of the finished membrane (due to the vapour pressure generated as the area is exposed to sunlight, which creates bubbles and deforms the elastic material).

In case of damp surfaces, or if there is suspicion of humidity, it is imperative to pre-treat the area with Impermax Humidity Primer.

It is recommended to use Humidity Primer in most situations. Impermax can be applied even in cases of low temperatures (< 5ºC) and high relative humidity’s, obtaining very short cure times in combination with our PUR Cat additive. Read more

Usage:
5 kg is sufficient for approx. 16.6 m²

SKU: LS1009 Category:

Description

Impermax Humidity Primer

It is not recommended to apply Impermax Aqua Liquid Pond Paint  membrane directly on surfaces which may contain moisture or on damp surfaces, or humidity content, either on the surface or trapped underneath.

Humidity creates two important problems in treatments:

  • Lack of adhesion.
  • The appearance of blisters in the surface of the finished membrane (due to the vapour pressure generated as the area is exposed to sunlight, which creates bubbles and deforms the elastic material).

In case of damp surfaces, or if there is suspicion of humidity, it is imperative to pre-treat the area with Impermax Humidity Primer.

It is recommended to use Humidity Primer in most situations. Impermax can be applied even in cases of low temperatures (< 5ºC) and high relative humidity’s, obtaining very short cure times in combination with our PUR Cat additive.

Usage:
5 kg is sufficient for approx. 16.6 m²

 

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Manual

 

 

Impermax Humidity Primer.pdf

Q & A

Ask a question
There are no questions yet

Shipping Rules

We have several different ways of shipping available on our website for you to select when you go through to checkout

  • We use Evri for our Economy Service this can take between 2 and 5 days. This service starts from £4.90. Evri collect from us on a Monday and Thursday which is a Tuesday and Friday delivery to you
  • We use DPD and DX for our premium/standard service which is a next working day delivery this service price starts from £7.95. This is collected from us Monday through to Friday, We cannot Guarantee it will be a next day as it is courier dependant
  • We use Dx Freight for our standard large service for things like pipe lengths and larger items This service is £19.95. This is on a next working day delivery and is Monday through to Friday.
  • We use APC for our Fish delivery service this service is £35. This is an overnight service. Koi will be scheduled to arrive between 8.00am – 12:00 midday. You also MUST be in to sign for the koi. Delivery days are Wednesday, Thursday & now Fridays and will always be pre arranged with you
  • Some larger items and bespoke items are dropped shipped to speed up delivery
  • We also ship from our suppliers this is to speed up delivery
  • We also offer Free Delivery on orders over £100 excluding lengths of pipe and live fish
  • Live fish are sent with APC and have a price of £35.00. More than 1 Koi can fit in a box
  • All our shipping companies do give us tracking information that you should receive by email this includes any orders we drop ship.

Additional information

Weight 6 kg
Dimensions 40 × 40 × 40 cm
Size

5Kg, 10Kg

Related Products

Sale!
Impermax solvent 4 kg
Impermax Solvent 4 kg

Impermax Solvent 4 kg

Impermax Solvent is ideal in situations when porous materials such as cementing, masonry etc… it is recommended to apply a first layer of Impermax diluted with the Rayston solvent in a proportion of 5 to 10%. When the porous materials are saturated, it is then possible to apply the liquid membrane normally. Ideally, this first application should be done at a rate of 0.5 kg / m2 This product can also be used to dilute Impermax (5 to 10%) for airless application. Read more

No reviews yet Original price was: £65.99.Current price is: £47.99. inc. VAT Add to basket
Impermax Paintchlore
Impermax Paintchlore

AquaForte Impermax Paintchlore

Impermax Paintchlore Transparent (chlorine resistant)  can be painted over an existing Impermax layer to make this chlorine resistant, or you want to repair a leak to other existing (swimming pool) tiles or (swimming pool) film.

Since the normal Impermax Liquid film is not chlorine resistant. Impermax 2 kg per m² general description: economical and easy to use, gives your pond a seamless, continuous membrane that completely matches the surface. Outstanding mechanical and chemical properties. Certified according to EEC directive 98/83/CE, which means it can even come into contact with drinking water for human consumption. This membrane can even be easily used on places that other systems find hard to reach. Impermax can be applied at low temperatures and in relatively damp conditions. Doesn’t need to be mixed and no special primer is required. The product consists of one component. Read more

It is recommended that in most use cases that the Humidity Primer is used as a base. Consumption: 2 kg per m².

No reviews yet Price range: £207.99 through £909.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
gold label paint
Gold Label Pond Paint Clear

Gold Label Pond Paint Clear

This unique paint is designed to effectively seal and re-paint the concrete lining of your pond. It works using only 2 coats (on smooth surfaces) without needing primer, and as it is water based can be applied to damp surfaces. This means it is also less toxic than traditional pond paints.  It has coverage of 6-8 m2 which also means with 2 coats used (on smooth rendered concrete) it is far more cost effective than the typical pond paints out there. With a second coat application time of 6-48 hours and such ease of application, professional pond builders are choosing Gold Label Pond Paint every time! It comes in a variety of colours and sizes, is easy to mix and apply, and dries after 6-8 hours (full cure 3-7 days). The paint also works on other surfaces such as: blocks, brick, tiles, fibreglass and plastic. It should last approximately 5-10 years, giving you a fresh look to your water tight pond for years to come. Read more

Key Points:

  • No Primer Needed
  • Works on damp surfaces
  • Easy to apply with brush, roller or spray.
  • Water based, therefore easier to clean & less toxic.
  • 2 coats only (on smooth surfaces)
  • Quicker pond refill than single pack paints
  • Coverage of 6-8 m2 per litre
  • Comes in recyclable packaging
Price range: £68.99 through £226.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
G4 Black Pond Sealer
G4 Black Pond Sealer

G4 Black Pond Sealer

G4 Black Pond Sealer is a moisture cured polyurethane which forms a non-porous seal on concrete rendered ponds, G4 pond sealer uses the moisture in the air and the render to harden, G4 pond sealer can be applied to slightly damp surfaces, but it is important that the render is sufficiently dry to be porous so as to enable the first coat of G4 pond sealer to bond and obtain a mechanical grip, G4 pond sealer can be applied in poor weather conditions, high humidity and at temperatures down to zero degree’s. Read more

Application:

G4 pond sealer Clear – 3 coats = 550g per sqm for the three coats (approximately 185ml per m2)
G4 pond sealer Coloured – 2 coats of Clear = 410g per sqm for 2 coats (approximately 205ml per m2)

G4 Pond Sealer is available in Standard Clear, Black and Green.

If rain is expected make provision for covering the coated area, since water can damage the G4 pond sealer during the curing process. As soon as it is superficially dry water should not affect G4 pond sealer

Price range: £43.99 through £646.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Impermax Aqua Liquid Pond Paint
Impermax Aqua Liquid Pond Paint

Impermax Aqua Liquid Pond Paint

Impermax is a single component, high performance waterproofing material, based on Polyurethane, certified according to EEC Directive 98/83/CE, and which can be in direct contact with drinking water for human consumption. It can easily be applied on different kinds of surfaces used in hydraulic infrastructures such as concrete, mortar, ceramics, fibreglass, reinforced polyester, etc. Read more

Curing time: 4-6 hours in the summer, 12-24 hours. Apply at least 3 to 4 layers to obtain a membrane thickness of 1.5 to 1.9 mm (2 kilo per m²).

It is recommended to use Humidity Primer in most situations.

 

Price range: £46.99 through £181.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Impermax PU Primer 4 kg
Impermax PU Primer 4 kg

Impermax PU Primer 4 kg

The PU primer serves as a primer for very smooth and non-porous surfaces such as ceramics, tiles, metal, plastic, etc. and thus ensures better adhesion between the existing surface and Impermax. If the waterproof surface is very smooth and non-porous (e.g. ceramic, tile, aluminium, etc.) it can happen that the high cohesion of this product means that Impermax does not adhere immediately. First treat the surface with PU primer, this ensures better adhesion between the existing surface and Impermax. Read more

Consumption:

0.2 kg / per m²
4 kg are sufficient for approx. 20 m²

The quantity of PU Primer should be approx., 200 to 300 grams per square meter.

No reviews yet £106.99 inc. VAT Add to basket
Impermax Geomax Geotextiel – 30cm x 100m
Impermax Geomax Geotextiel – 30cm x 100m

Impermax Geomax Geotextiel – 30cm x 100m

Geomax Geotextiel reinforcement. A special nonwoven, made of synthetic fibre, specially developed for use in conjunction with Impermax (and its elasticity). This is optimally suitable for places (eg corners, gaps, floor drains) where increased protection is necessary. This cloth minimizes the effect of self-distribution of the product and thus ensures that a corresponding thickness is reached quickly.

Main applications: IMPERMAX internal layer to protect against damage caused by corners, sharp objects, edges, etc to reduce the effect of self-distribution, for example, when processing steep / vertical surfaces as protection from below, when IMPERMAX on uneven surfaces is processed. Read more

Geomax is available in small width (30 cm), ideal to treat wall/floor areas, and when preparing areas before waterproofing.

No reviews yet £198.99 inc. VAT Add to basket
G4 Pond Sealer Clear
G4 Pond Sealer Clear

G4 Pond Sealer Clear

G4 Pond Sealer is a moisture cured polyurethane which forms a non-porous seal on concrete rendered ponds, G4 pond sealer uses the moisture in the air and the render to harden, G4 pond sealer can be applied to slightly damp surfaces, but it is important that the render is sufficiently dry to be porous so as to enable the first coat of G4 pond sealer to bond and obtain a mechanical grip, G4 pond sealer can be applied in poor weather conditions, high humidity and at temperatures down to zero degree’s.

Application:

G4 sealer Clear – 3 coats = 550g per sqm for the three coats (approximately 185ml per m2)
G4 sealer Coloured – 2 coats of Clear = 410g per sqm for 2 coats (approximately 205ml per m2)

G4 Pond Sealer is available in Standard Clear, Black and Green.

If rain is expected make provision for covering the coated area, since water can damage the G4 pond sealer during the curing process. As soon as it is superficially dry water should not affect G4 pond sealer

Price range: £16.99 through £429.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page