Medo 45 Replacement Filter Foam
Medo 45 Replacement Filter Foam
This is a replacement air filter sponge for the Medo – Piston Driven pumps.
Over time pumps output will be reduced due to the clogging of the Filters.
It is advised to change the filter periodically.
Medo 45 Service Kit
Medo 45 Service Kit
we supply a full range of service kits for your Medo Air Pumps. Like anything else with moving parts, maintenance is required in order to keep your Medo Air Pump working at optimum performance.
Regular servicing, recommended annually, can prolong the life expectancy of your pump.
Medo 80 Replacement Filter Foam
Medo 80 Replacement Filter Foam
This is a replacement air filter sponge for the Medo – Piston Driven pumps.
Over time pumps output will be reduced due to the clogging of the Filters.
It is advised to change the filter periodically.
Medo 80 Service Kit
Medo 80 Service Kit
we supply a full range of service kits for your Medo Air Pumps. Like anything else with moving parts, maintenance is required in order to keep your Medo Air Pump working at optimum performance.
Regular servicing, recommended annually, can prolong the life expectancy of your pump.
Nexus Inlet Slide Plate
Nexus Inlet Slide Plate
This is a genuine Evolution Aqua replacement part and is used to prevent water coming from the pond or reverse flowing back to the pond whist cleaning.
Nexus Lid Bungee Cord Fastening Kit
Nexus Lid – Bungee Cord Fastening Kit
The Nexus Lid – Bungee Cord Fastening Kit can be easily fitted to the Nexus and lid to ensure it remains completely secure at all times. The kit includes 4x Bungee cord fasteners, pins nuts and bolts.
Oase BioTec 80000 Filter Cartridge Set
Oase BioTec 80000 Filter Cartridge Set
- Genuine Oase replacement cartridge set
- 2 x Coarse grade filter foams (Blue)
- 2 x Medium Grade filter foams (Purple)
- 2 x Fine Grade filter foams (Red)
- Each filter foam is supplied with attaching clip
The BioTec Premium 80000 Filter Cartridge Set is a genuine Oase replacement product.
Superb filtration results are achieved thanks to the 3 different grades of foam; Coarse (blue), medium (purple) and fine (red). Each grade of foam provides a different level of debris extraction along with a significant biological surface area whilst all the time ensuring consistent unhindered flow-through rates through the filter.
In order to ensure the optimum performance of your Oase pond filter, it is crucial that genuine Oase sponges are used. Cheaper replica parts will produce poor filtration results and invalidate the Oase Clearwater Guarantee.
Oase Bitron C Quartz Sleeves
Oase Bitron C Quartz Sleeves
For those Koi and pond enthusiasts who are not as careful at they should be we sell the Oase Bitron C Quartz Sleeves.
The Oase Bitron C Quartz Sleeve insulates the lamp from the water, allowing the lamp to operate at the optimum performance.
The ultraviolet lamp will remain independent of the flow of water.
Quartz is extremely transparent over a wide spectral range, with a low coefficient of thermal expansion and quartz is resistant to scratching and thermal shock. Fused quartz is made form crushing and melting natural materials. The purity of quartz is paramount to the efficiency of the lamp and sleeve.
The Quartz sleeves are available for the following Bitron C models
- 18w/24w
- 36w/55w
Oase Filtoclear Quartz Sleeves
Oase Filtoclear Quartz Sleeves
For those Koi and pond enthusiasts who are not as careful at they should be we sell the Oase Filtoclear Quartz Sleeves.
The Oase Filtoclear Quartz Sleeve insulates the lamp from the water, allowing the lamp to operate at the optimum performance.
The ultraviolet lamp will remain independent of the flow of water.
Quartz is extremely transparent over a wide spectral range, with a low coefficient of thermal expansion and quartz is resistant to scratching and thermal shock. Fused quartz is made form crushing and melting natural materials. The purity of quartz is paramount to the efficiency of the lamp and sleeve.
The Oase Filtoclear Quartz sleeves are available for the following
- Oase Filtoclear 12000
- Oase Filtoclear 16000
- Oase Filtoclear 20000/30000
Oase Filtoclear Replacement Bulbs
Oase Filtoclear Replacement Bulbs
The Oase Filtoclear Replacement Bulbs are characterized by there high quality. The Oase Filtoclear Replacement Bulbs are a PLL bulb with 4 Pins and are available for the 4 different types of Filtoclear. Since the UVC clarifier is mostly in constant use, the effect can wear off after approx. 8000 hours. It is therefore recommended that the lamps be replaced at regular intervals. It is best to think about this in spring so that your clarifier is ready for the whole pond season.
Sizes Available:
- Oase Filtoclear 5000 – 18w PLL
- Oase Filtoclear 13000 – 24w PLL
- Oase Filtoclear 19000 – 42w PLL
- Oase Filtoclear 31000 – 60w PLL
Oase ProfiClear Premium-Compact-L Replacement Sieve Set 150 micron
Oase ProfiClear Premium-Compact-L Replacement Sieve Set 150 micron
- Genuine Oase spare part
- 150 Micron
- Supplied as a set of 8
This is a genuine Oase Replacement Sieve Set for use with the Oase range of Drum Filters
These high quality replacement Filter Screens remove waste down to 150μ, providing outstanding mechanical filtration results.
Sold as a complete set of 8 Filter Screens the they are suitable for the following Oase Products:
- Oase ProfiClear Premium
- Oase ProfiClear Compact-L
Oase ProfiClear Premium-Compact-L Replacement Sieve Set 30 micron
Oase ProfiClear Premium-Compact-L Replacement Sieve Set 30 micron
- Genuine Oase spare part
- 30 Micron
- Supplied as a set of 8
This is a genuine Oase Replacement Sieve Set for use with the Oase range of Drum Filters
These high quality replacement Filter Screens remove waste down to 30μ, providing outstanding mechanical filtration results.
Sold as a complete set of 8 Filter Screens they are suitable for the following Oase Products:
- Oase ProfiClear Premium
- Oase ProfiClear Compact-L
Oase ProfiClear Premium-Compact-L Replacement Sieve Set 60 micron
Oase ProfiClear Premium-Compact-L Replacement Sieve Set 60 micron
- Genuine Oase spare part
- 60 Micron
- Supplied as a set of 8
This is a genuine Oase Replacement Sieve Set for use with the Oase range of Drum Filters
These high quality replacement Filter Screens remove waste down to 60μ, providing outstanding mechanical filtration results.
Sold as a complete set of 8 Filter Screens the they are suitable for the following Oase Products:
- Oase ProfiClear Premium
- Oase ProfiClear Compact-L
Oase Swim Skim 25 Replacement Foam
Oase Swim Skim 25 Replacement Foam
This is a Replacement Foam for the Oase SwimSkim 25 Pond Skimmer.
Oase Swim Skim 50 Replacement Foam
Oase Swim Skim 50 Replacement Foam
This is a Replacement Foam for the Oase SwimSkim 50 and CWS Pond Skimmers.
Oase UV Replacement Bulbs
Oase UV Replacement Bulbs
The Oase UV Replacement Bulbs are characterized by there high quality. Since the UVC clarifier is mostly in constant use, the effect can wear off after approx. 8000 hours. It is therefore recommended that the lamps be replaced at regular intervals. It is best to think about this in spring so that your clarifier is ready for the whole pond season. These are available in 7 different sizes.
Sizes:
- 11w
- 13w
- 18w
- 24w
- 36w
- 55w
- 60w
Replacement Electrics For TMC Pro Pond UV 110
Replacement Electrics For TMC Pro Pond UV 110
The TMC Pro Pond 110 watt replacement electric packs are supplied all pre-wired and ready to use. They are supplied with 3 metres of power cable and come with the white end caps pre fitted with outer blue cover. The TMC Pro Pond 110 watt replacement electric packs cables numbered and colour coded for ease of installation.
Replacement Lamp For T5 Submersible 75W UVC – Red End
Replacement Lamp For T5 Submersible 75W UVC – Red End
This is one of the most integral parts of your overall filtration system, yet we often forget to maintain it as time goes by.
You should replace the UV lamp in your UV unit every year.
Although the lamp may still burn, it no longer emits the right UV radiation.
UV Replacement Lamps
Be sure to clean the quartz glass of the unit carefully before installing the new lamp to optimise the light transmission.
Important Note: When ordering UV lamps please make sure you open the box to make sure the lamps are not broken before signing the delivery note, if the bulbs are damaged please sign the delivery note “Damaged” and refuse delivery.
A claim will ONLY be accepted if signed for as DAMAGED.
If you have any questions regarding our ultraviolet lights, please do not hesitate to contact us.
Suitable for :
- X-Clear Budgetflex T5 75w
- X-Clear Ultraflex T5 75w
- T5 Submersible 75w
Replacement Quartz sleeve for EazyPod UV
Replacement Quartz sleeve for Eazy Pod UV
This is a genuine Evolution Aqua EazyPod Replacement Quartz Sleeve for use with the Evolution Aqua EazyPod UV Automatic and EazyPod Complete models.
Superfish Koi Flow Service Kits
Superfish Koi Flow Service Kits
These are genuine Replacement Complete Service Kits For Superfish Koi Flow Air pumps And The Hailea V range. This kit is for The Old Blue and New Grey Models. Includes diaphragms, valve housings, rubber tubes and air filter.
- Koi Flow 20 and Hailea V20
- Koi Flow 30 and Hailea V30
- Koi Flow 60 and Hailea V60
T5 Submersible 40-75W UVC Replacement Quartz Sleeve
T5 Submersible 40-75W UVC Replacement Quartz Sleeve
Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss.
Benefits
- These lamps can be used in filter tanks so the water can pass without any resistance/ pressure loss.
- The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in a tank.
- A special tank connector is available for direct installation in i.e. filters.
Note:
- This product is only intended for professional use.
- It should be installed in a professional application or assembled with other appliances.
- Before using this product the installer/user must take care the product complies to the latest European standards for UV-C units.
- Immersion UV-C
T5 Submersible 40-75W UVC Replacement Quartz Sleeve and not the complete unit
T5 Submersible 40W UVC Replacement Bulb
T5 Submersible 40W UVC Replacement Bulb
Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss.
Benefits
- These lamps can be used in filter tanks so the water can pass without any resistance/ pressure loss.
- The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in a tank.
- A special tank connector is available for direct installation in i.e. filters.
Note:
- This product is only intended for professional use.
- It should be installed in a professional application or assembled with other appliances.
- Before using this product the installer/user must take care the product complies to the latest European standards for UV-C units.
- 40W Immersion UV-C
T5 Submersible 40W UVC Replacement Bulb and not the complete unit
Tempest Waste Valve Assembly
Tempest Waste Valve Assembly
This is a genuine Evolution Aqua replacement part and is suitable for the Evolution Aqua Tempest.
TMC Pro Pond UV Quartz Sleeves
TMC Pro Pond UV Quartz Sleeves
For those Koi and pond enthusiasts who are not as careful as they might be, we do also sell the spare TMC Pro Pond UV Quartz Sleeves in the most standard sizes.
The TMC Pro Pond UV Quartz Sleeve insulates the lamp from the water, allowing the lamp to operate at the optimum performance.
The ultraviolet lamp will remain independent of the flow of water. The TMC Pro Pond UV Quartz Sleeves are of open ended construction and are made from pure fused quartz.
Quartz is extremely transparent over a wide spectral range, with a low coefficient of thermal expansion and quartz is resistant to scratching and thermal shock. Fused quartz is made form crushing and melting natural materials. The purity of quartz is paramount to the efficiency of the lamp and sleeve.
TMC UV Replacement Bulbs
TMC UV Replacement Bulbs
The TMC Replacement Bulbs are available for the whole range of the TMC pond UV clarifiers. The T8 Bulbs are available in 2 different wattages with the 110w model requiring 2x 55w Bulbs. Since the UVC clarifier is mostly in constant use, the effect can wear off it is therefore recommended that the lamps be replaced at regular intervals. It is best to think about this in spring so that your clarifier is ready for the whole pond season.
Sizes Available:
- 30w Bulb Length 892mm
- 55w Bulb Length 892mm
- 110w Bulb Length 2x 892mm
Yamitsu Algae Master Pond UV Clarifier Replacement Electrics
Yamitsu Algae Master Pond UV Clarifier Replacement Electrics
Yamitsu algae master uv’s are made from UV stabilised materials to ensure a longer life and incorporate turbulators to enhance the unit’s performance. Large inlet and exhaust ports make the algae master uv suitable for a wide range of pond uv applications. It is recommended that the algae master uv should be installed using solid solvent weld pipe.
However, all algae master uv’s come complete with free (glue in) hosetails enabling them to be connected to ½”, ¾”, 1″, 1¼” and 1½” flexible pipe. Algae master uv’s will also fit most popular 1½” household solvent weld waste and pressure pipes.
Yamitsu Algae Master Pond UV Clarifier Installation
If you have a severe algae problem you should effect a partial water change before starting the installation. Yamitsu Algae Master Pond UV can be added to any existing filtration system. For best results algae master units should be fitted in line, after the pump, with water being forced through them. Use the largest size of pipe possible. If hosetails are to be used, it is very important that they are trimmed to the largest possible size that will fit inside the flexible pipe (before glueing in place). This will ensure that the maximum flow rate can be obtained for the size of pipe.
Yamitsu Algae Master UV Maintenance
Although maintenance is minimal all UV lamps need replacing at six monthly intervals. The algae master’s uv lamp may be illuminated and appear to be working but the radiation dosage diminishes with age and is ineffective after six months. Dispose of used uv lamps sensibly. Even exhausted uv lamps should NEVER be looked at directly when illuminated.
As the algae master uv is dependant upon water passing through it, it is important to ensure that any pump strainers, pre-filters or delivery pipes are not blocked or are causing the flow to be restricted.
|
||||||||||||||
This is the Yamitsu Algae Master Pond UV Clarifier Replacement Electrics and not the actual unit !
Yamitsu Algae Master UV Replacement Bulbs
Yamitsu Algae Master UV Replacement Bulbs
The Yamitsu Algae Master UV Replacement Bulbs are available for the whole range of the Yamitsu Algae Master Pond UV clarifiers. The T8 Bulbs are available in 5 different wattages with the 110w model requiring 2x 55w Bulbs. Since the UVC clarifier is mostly in constant use, the effect can wear off it is therefore recommended that the lamps be replaced at regular intervals. It is best to think about this in spring so that your clarifier is ready for the whole pond season.
Sizes Available:
- 11w Bulb Length 210mm
- 15w Bulb Length 435mm
- 25w Bulb Length 435mm
- 30w Bulb Length 892mm
- 55w Bulb Length 892mm
- 110w Bulb Length 2x 892mm
Yamitsu Quartz Sleeves
Yamitsu Quartz Sleeves
For those Koi and pond enthusiasts who are not as careful at they might be, we do also sell the spare Yamitsu Quartz Sleeves in the most standard sizes.
The Yamitsu Quartz Sleeve insulates the lamp from the water, allowing the lamp to operate at the optimum performance.
The ultraviolet lamp will remain independent of the flow of water. Yamitsu Quartz Sleeves are of open-ended construction and are made from pure fused quartz.
Quartz is extremely transparent over a wide spectral range, with a low coefficient of thermal expansion and quartz is resistant to scratching and thermal shock. Fused quartz is made from crushing and melting natural materials. The purity of quartz is paramount to the efficiency of the lamp and sleeve.
Yamitsu Quartz Sleeve Benefits:
- Greater ultraviolet transmission
- Low coefficient of thermal expansion
- Increased hardness and resistance to scratching
- Higher resistance to solarisation or darkening from ultraviolet radiation
Yamitsu Quartz Sleeve Dimensions:
15w/25w
- Overall length 430mm
- External diameter 30mm
- Internal diameter 27mm
30w/55w
- Overall length 890mm
- External diameter 30mm
- Internal diameter 27mm
Quartz sleeves are available for the Yamitsu Algae Master Pond UV Clarifier 6, 8, 11, 15-, 25-, 30- and 55-watt units.
Amalgam Submersible Replacement Quartz UV 40 watt
Amalgam Submersible Replacement Quartz UV 40 watt