£7.99 inc. VAT
Air Pump Rubber Connector
This Rubber elbow will allow you to connect your air pump to an airline manifold using the 2 spring clips that come included.
Kit contains : 1x Original ‘elbow’ black rubber hose with 2x spring clip retainers.
Can be used for 90 degree or straight (if cut).
Replacement for original supplied with air pumps.
Air Pump Rubber Connector
This Rubber elbow will allow you to connect your air pump to an airline manifold using the 2 clips included.
Kit contains : 1x Original ‘elbow’ black rubber hose with 2x spring clip retainers.
Can be used for 90 degree or straight (if cut).
Replacement for original supplied with air pumps.
Only logged in customers who have purchased this product may leave a review.
Ask a question
Your question will be answered by a store representative or other customers.
Thank you for the question!
Your question has been received and will be answered soon. Please do not submit the same question again.
Error
An error occurred when saving your question. Please report it to the website administrator. Additional information:
Add an answer
Thank you for the answer!
Your answer has been received and will be published soon. Please do not submit the same answer again.
Error
An error occurred when saving your answer. Please report it to the website administrator. Additional information:
| Weight | 0.02 kg |
|---|
4 mm Air Line Fittings
Air line of course, like the air stones, is essential for any Koi or pond keeper, and allows the air being generated by the Air Pump, to be delivered to the point where it is required.
These 4 mm Airline connectors will help divide or add airline and airstones to your system.
Fits all the 4 mm Silicon and clear Airline above.
8-10mm Braided Airline
This Reinforced Braided clear PVC flexible Tubing is probably the strongest of all the air ‘Standard’ air lines, it is extremely well constructed and the reinforced braided construction gives it superb strength and rigidity.
12mm Tee Piece
Air line of course, like the air stones, is essential for any Koi or pond keeper, and allows the air being generated by the Air Pump, to be delivered to the point where it is required.
The rubber tubing on these diffusers have thousands of very small holes which produce very fine bubble which improves the oxygen content of your pond water.
These are suited for large bore air pipe 8mm
If you have fish in your pond, it may be that just a simple waterfall is not doing enough to aerate your water. Proper aeration is crucial to the beneficial bacteria of your filter media, to the aquatic plants growing in your pond and of course to your koi.
Air Pump Manifolds
The Air Pump Manifolds is a type of plumbing fixture specifically designed for use in aquatic pump systems. This manifold is made from a durable and corrosion-resistant material, and is designed to allow multiple hoses or pipes to be connected together in a single location.
The Air Pump Manifolds has ports, or openings, which can be used to connect hoses or pipes of various sizes. It is easy to install and use, and is a reliable and durable choice for use in aquatic pump systems.
These are available in 10, 8 and 6 way manifolds
Stainless Steel Air Taps
These 4 mm Stainless Steel Air Taps are extremely useful if you are intending to run an air-line ring the full length of your system where Air is required in the actual biological filtration systems.
Each 4 mm Stainless Steel Air Taps has its own 4 mm threaded end which can be screwed quite easily into PVC pipework etc. after pre-drilling which allows you to build your own tailor made distribution to supply air.
4mm Silicone Airline
This Silicone Airline Tubing is ozone resistant, and is very flexible and easy to use. Max psi of 30. It is easy to cut with standard scissors. It is 6mm in diameter, and is safe for fresh or saltwater.
We sell this Silicone Air-Line Tubing in 1 meter increments, or by the roll. Remember it is always a good idea to have extra on hand.
9mm (3/8″) Non-return valves
Non-return value (Brass), Hose Tail 8mm to fit 3/8″ valves, Hose Tail 10mm to fit 3/8″ valves
Please note you will require two hose tails for the non return valve which are sold separately
Paul Eustace (verified owner) –