Description
Aquadrift Bottom Drain Air Kit
The Aquadrift Bottom Drain Air Kit Is to connect the 1″ pressure pipe from the bottom drain to 19mm flexi hose that can be put to an air pump.
Aquadrift Bottom Drain Air Kit
£7.99 inc. VAT
Aquadrift Bottom Drain Air Kit
The Aquadrift Bottom Drain Air Kit Is to connect the 1″ pressure pipe from the bottom drain to 19mm flexi hose that can be put to an air pump. Read more
Out of stock
Only logged in customers who have purchased this product may leave a review.
Q & A
Ask a question
There are no questions yet
Additional information
| Weight | 0.2 kg |
|---|---|
| Dimensions | 5 × 5 × 5 cm |
Related Products
Spindrifter Liner Flange Kits
Spindrifter Liner Flange Kits
The Spindrifter liner Flange Kit allows you to use the drain with a liner. Read more
Comes complete with fixings.
4″ Flange
- 350mm external diameter
- 250mm internal diameter
- 5mm thick
- 50mm flange width
- 12 holes
3″ Flange
- 295mm external diameter
- 200mm internal diameter
- 5mm thick
- 48mm flange width
- 8 holes
2″ Flange
- 238mm external diameter
- 160mm internal diameter
- 5mm thick
- 40mm flange width
- 6 holes
Available for the 4″, 3″ and 2″ Spindrifter Drains
Aquadrift 4″ Bottom Drain
Aquadrift 4″ Bottom Drain
The Aquadrift 4″ Bottom Drain is perfect for all gravity fed installations. Precision machine cut to the highest standard, a bottom drain you can rely on. 1″ separate pressure pipe air connection allows air to enter the drain independently from the water pipe outlet. The membrane and backing plate on the Aquadrift bottom drain fits into a recess in the specially manufactured rubber dome. The recess in the Aquadrift bottom drain prevents the membrane from becoming detached. The complete assembly is secured to the Aquadrift bottom drain by means of a threaded stem, which also provides the air inlet. Read more
- Suitable for 4″ or 110mm pipework. Can be used with standard waste pipe with suitable connectors.
- Recommended maximum air pressure 120ltrs
- Can be used with no air hose to the unit, simply use the appropriate connector after your air pump
Tommy Bottom Drains
Tommy Bottom Drains
These Tommy Bottom Drains are perfect for those using mid water feeds to the filter systems and are worried about pulling fish in to the filter, pumps etc. The Tommy Drain has its outlet at the Bottom of the Drain instead of the side of the drain like typical sump bottom drains. The Tommy Drain has a removable lid with stainless Steel screws and a flange ring for fitting to liner or concrete ponds. The Tommy Drain can still be used mounted in the pond base if required, such as for a quarantine system or where the outlet is best suited at the bottom of the drain instead of the side. The Tommy Bottom Drains are suitable for outlets from the side or bottom of your pond or filter. Read more
Available in the following sizes: 40mm, 50mm, 82mm and the most popular 110 mm.
4 Inch Socket To 110mm Plain Male Converter
4 Inch Socket To 110mm Plain Male Converter
The 4 Inch Socket To 110mm Plain Male Converter is designed to fit inside a 4″ bottom drain or socket to convert the standard 4″ opening to 110mm. Read more
Spindrifter Aerated Bottom Drain
Spindrifter Aerated Bottom Drain
The Spindrifter aerated bottom drain is known worldwide for its quality and design. This Spindrifter aerated bottom drain completely replaces the “Standard Bottom Drain.” The most noticeable feature of the Spindrifter bottom drain is the extra 1 inch DIA Pressure pipe connection in the sump of the drain. This allows the air supply hose to enter the sump independent of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for blanket weed to attach. Read more
Available Sizes:
- 4 inch Bottom Drain For Concrete comes with direct air feed kit
- 3 inch Bottom Drain For Concrete comes with direct air feed kit
- 2 inch Bottom Drain For Concrete
Recommended Air Flow:
- Bottom Drain at around 4/5 feet deep requires a 40lpm Air pump.
4″ SpinDrifter Aerated Bottom Drain to 3″ Pipework Kit
4″ SpinDrifter Aerated Bottom Drain to 3″ Pipework Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website. Read more
4″ SpinDrifter Aerated Bottom Drain to 3″ Pipework Kit:
- 1 x 4″ Aerated Bottom drain and Lid Includes Direct Air Feed Kit – AP4451
- 1x 4″- 3″ Reducer – PW7094
- 1 x 3mtr 3″ pressure pipe – PW7071
- 1 x 3mtr 1″ pressure pipe – PW7601
- 1 x 3″ 90 degree pressure swept bend – PW7644
- 1 x 1″ 90 degree pressure bend – PW7088 (07139)
You can build the kit to suit your project
Spindrifter 1 Inch Direct Air Feed Kit
Spindrifter 1 Inch Direct Air Feed Kit
The Spindrifter Direct Air Feed Kit allows you to hook up your air pump direct to the Diffuser; this means no Airline has to be threaded down the 1″ pressure pipe. This has a number of advantages but the main one is no water can find its way down the 1″ Pressure Pipe, which potentially will hold stagnant water and the dreaded blanketweed. Read more
This Direct Air Kit also prevents any back pressure, causing premature failure on your Air pumps.
4″ SpinDrifter Aerated Bottom Drain Kit
4″ SpinDrifter Aerated Bottom Drain Kit
At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website. Read more
3 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
- 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
- 1 x 3mtr 4″ pressure pipe – PW7078
- 1 x 3mtr 1″ pressure pipe – PW7601
- 1 x 4″ 90 degree pressure swept bend – PW7645
- 1 x 1″ 90 degree pressure bend – PW7088 (07139)
6 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
- 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
- 2 x 3mtr 4″ pressure pipe – PW7078
- 2 x 3mtr 1″ pressure pipe – PW7601
- 1 x 4″ 90 degree pressure swept bend – PW7645
- 1 x 1″ 90 degree pressure bend – PW7088 (07139)
- 1 x 4″ Straight joiner – PW7081 (07190)
- 1 x 1″ Straight joiner – PW7603 (07184)
9 mtr SpinDrifter Aerated Bottom Drain Kit Includes :
- 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
- 3 x 3mtr 4″ pressure pipe – PW7078
- 3 x 3mtr 1″ pressure pipe – PW7601
- 1 x 4″ 90 degree pressure swept bend – PW7645
- 1 x 1″ 90 degree pressure bend – PW7088 (07139)
- 2 x 4″ Straight joiner – PW7081 (07190)
- 2 x 1″ Straight joiner – PW7603 (07184)
If it’s for a liner installation then a flange kit is required and can be added to your basket separately .
https://youtu.be/-ZGL-HGBnXI
Reviews
There are no reviews yet