MICROBE-LIFT Natural Sludge Reducer

Microbe-Lift Super Start Bead Filter Bacteria

Microbe-Lift Super Start Bead Filter Bacteria has been specially formulated for all biological (bead filters). Like most types of mechanical/biological filters, bead filters rely on the use of a media that provides a high surface area/volume ratio. This allows for the support of the necessary biomas, in the form of a biofilm, to properly remove organic and inorganic waste from the water.

Within this biofilm it is possible to to carry out aerobic, facultative anerobic, anaerobic and chemosynthetic processes. In english, this actually means that we develop and grow various forms of bateria on our filter media which will result in the complete nitrifaction process and also develop the biomas which totally covers the bead media and becomes sticky, it is this sticky biomas that traps the small particles as part of the normal filtration process which results in clear clean water.

Microbe-Lift Super Start contains all these bacteria capable of carrying out all of the necessary processes for the optimum performance of bead filters.

When used according to the recommended dosage instructions Microbe-Lift Super Start will provide the following benefits:

• Rapid establishment of organic removal capabilities
• Rapid establishment of the nitrogen cycle including nitrification and denitrification
• Reduces the build up of residue in the filter, reducing maintenance and improving the filters efficiency
• Promotes the breakdown of risidual medications, like tea tree oils and formalin products which are inhibitory to most bacteria after use
• Promotes the rapid recover of your filter after the use of medications and antibiotics
• Effective over a wide pH range
• Reduces ammonia nitrogen levels
• Significantly reduces noxious odours caused by algae, fish waste and urine
• Reduces hydrogen sulphide, which creates strong offensive odours

Microbe-Lift Super Start Directions For Use:

When starting up a filter for the first time, apply Microbe-Lift Super Start for 4 weeks. Clean the filter the apply for a further two weeks. For regular maintenance for your system use in conjunction with Microbe-Lift Clean & Clear.

Please note that this product is not just for new filters and can be used whenever you feel it necessary, for example wneh introducing new fish and following medication and or treatments to your pond.

For the recommended dosages for the use of Microbe-Lift Super Start see the table below:

Microbe-Lift Phosphate Remover

Microbe-Lift Phosphate removeris the ultimate remedy for the removal of phosphates in fresh water.

Use Microbe-Lift Phosphate remover for starting new ponds which ensures low phosphate concentrations and mature ponds to ensure that the phosephate concentrations are kept at a minimum. To clear the pond’s water of phosphates sucessfully it is necessary to Use Phosphate remover regularly in both new and existing ponds.

Microbe-Lift Phosphate remover is a polymeric blend with outstanding qualities, including the ability to tie-up large quantities of phosphate without negatively influencing the pond water in any way.

Phosphate is caused by the decomposition of organic substances such as food surpluses, dead plant matter, and excretion. Although Phosphate is a vital part, it is only not detremental in low concentrations, however a phosphate increase could lead to water problems. To solve problems caused by Phosphate, it is recommended to keep the phosphate concentration in fresh water below 0.3ml/ltr.

Microbe-Lift Phosphate Remover Product Features:

• Safely removes Phosphate from Pond Water
• Will not harm fish or plants

Microbe-Lift Phosphate Remover Application:

Use 30ml of Microbe-Lift Phosphate Remover per 400 ltrs of pond water. Depending on the amount of organic/ fish waste , 30ml of phosphate remover can remove between 1 and 1.5mg per litre of phosphate. The dose can be repeated if the phosphate level is still too high, and sometime multiple treatement smay be necessary if ther eis a very high level of phophate present

1 litre on Phosphate remover will treat up to 12000 litres of pond water.