Home » Shop » Water Purifiers » Dechlorinator units » OASE PhosLess Flow 3000 Cartridge
PhosLess-Flow-3000
  • PhosLess-Flow-3000

OASE PhosLess Flow 3000 Cartridge

£204.99 inc. VAT

OASE PhosLess Flow 3000 Cartridge

The filter cartridges from the flow cartridge system use phosphate-storing materials to quickly and effectively remove algae-causing phosphates from the pond water. The phosphate content is lowered below the growth limit for algae thus preventing the growth of algae. An increase in phosphates, for example, due to a bath in the swimming pond or natural pool, are collected immediately. Ultra-smooth glass beads on both sides and the matched cartridge design distribute the water flow around the centrally filled granulate and ensure an optimal storage result. Read more

Features:

  • Total binding capacity up to 90 g of phosphate PO43-
  • The granulate absorbs available phosphate quickly and effectively; excellent absorption properties up to low concentrations of 0.035 mg/l (minimum for algae growth)
  • Ideal for starting at values greater than 0.2 mg/l PO43-
  • Intelligent water management in the cartridge enables faster absorption of phosphates with PhosLess
  • Optimal for a flow of between 300 l/h and 3300 l/h. Recommendation: A flow rate of 300 l/h for each 10 m³ of pond volume.
  • Can be combined with energy-saving pond pumps
  • To select the appropriate pump, a pressure loss through the cartridge of only about 3 m should be considered.
  • Easy and safe cartridge replacement – screw-on hose connections included
  • Can be installed in or out of the pond
  • Can be retrofitted in all swimming ponds and natural ponds in conjunction with 12 V pumps from OASE
  • Can also be used in fish ponds

Phosphate binder cartridge for reduction of high phosphate values.

SKU: MD997 (48792) Category:

Description

OASE PhosLess Flow 3000 Cartridge

The filter cartridges from the flow cartridge system use phosphate-storing materials to quickly and effectively remove algae-causing phosphates from the pond water. The phosphate content is lowered below the growth limit for algae thus preventing the growth of algae. An increase in phosphates, for example, due to a bath in the swimming pond or natural pool, are collected immediately. Ultra-smooth glass beads on both sides and the matched cartridge design distribute the water flow around the centrally filled granulate and ensure an optimal storage result.

Phosphate binder cartridge for reduction of high phosphate values.

Features:

  • Total binding capacity up to 90 g of phosphate PO43-
  • The granulate absorbs available phosphate quickly and effectively; excellent absorption properties up to low concentrations of 0.035 mg/l (minimum for algae growth)
  • Ideal for starting at values greater than 0.2 mg/l PO43-
  • Intelligent water management in the cartridge enables faster absorption of phosphates with PhosLess
  • Optimal for a flow of between 300 l/h and 3300 l/h. Recommendation: A flow rate of 300 l/h for each 10 m³ of pond volume.
  • Can be combined with energy-saving pond pumps
  • To select the appropriate pump, a pressure loss through the cartridge of only about 3 m should be considered.
  • Easy and safe cartridge replacement – screw-on hose connections included
  • Can be installed in or out of the pond
  • Can be retrofitted in all swimming ponds and natural ponds in conjunction with 12 V pumps from OASE
  • Can also be used in fish ponds

Characteristics:

  • POWERFUL: Has a total binding capacity of up to 90 g of phosphate PO43-
  • SPECIAL GRANULATE: The binder absorbs available phosphate quickly and effectively, even at concentrations as low as 0.035 mg/l & (minimum level for algae growth)
  • IDEAL: Perfect for starting at phosphate values greater than 0.2 mg/l PO43-
Technical Data:
Dimensions (L x W x H) mm 480 x 140 x 140
Min. pressure capacity bar 0.3
Max. operating pressure bar 4
Phosphate binding capacity g 90
Max. flow rate l/h 3300
Connection 2 x 50 mm / 2″
Usage type Submersed or Inline capable
Max. flow rate AquaMax Eco Premium 6000 / 12 V l/h 2200
Max. flow rate AquaMax Eco Premium 12000 / 12 V l/h 2600
Max. flow rate AquaMax Eco Premium 5000 l/h 2000

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Q & A

Ask a question
There are no questions yet

How are shipping works

We have several different ways of shipping available on our website for you to select when you go through to checkout

 

1, We use Evri for our Economy service this service can take between 2 and 5 day This service starts from £4.90

This is because Evri collect from us on a Monday and Thursday only  which will be a Tuesday and Friday delivery to you

 

2, We use DPD for our premium/standard service which is next working day delivery This service prices start from £7.95

This is collected from us Monday through to Friday This is NOT a Guaranteed next day delivery service however it is a overnight service and is quite often delivered to you the next day, excluding remote areas

 

3, We use Dx Freight for our standard large service for things like Pipe lengths and larger items This service is £19.95

This is on a next working day delivery and is Monday through to Friday.

 

4, We use APC for our Fish delivery service This service is £35

This is an overnight service  Koi will be scheduled to arrive between 8.00am – 12:00 midday.

You also  MUST be in to sign for the koi.

Delivery days are Wednesday, Thursday & now Fridays and will always be pre arranged with you

 

5, Some larger items and bespoke items are dropped shipped this is to speed up delivery

6, We also ship from our supplier from warehouse again this is to speed up delivery

 

7, We also offer Free Delivery on orders over £100  excluding lengths of pipes and live fish

Lengths of pipe are sent with DX and have a price of £19.95

Live fish are sent with APC and have a price of £35.00

 

All our shipping company’s do give us tracking information that you should receive by email this includes any orders we drop ship.

Additional information

Weight 3 kg
Dimensions 48 × 14 × 14 cm

Related Products

Kockney Koi Complete Wall Mounted Pre-Filter Kit
Kockney Koi Complete Wall Mounted Pre-Filter Kit

Kockney Koi Complete Wall Mounted Pre-Filter Kit

The Kockney Koi Complete Wall Mounted Pre-Filter Kit for water purifiers contains everything you need to attach it to your kockney koi water purifier. Read more

Kit contains:

  • Pre-Filter House
  • 5 Micron Sediment filter
  • Wall Mounting kit with screws
  • Wrench
  • 2 x Threaded connectors
  • Metal connection hose to connect the purifier to the pre-filter
No reviews yet £72.99 inc. VAT Add to basket
Pro-Line Cylinder Purifiers 3/4″ Connection Fitting
Pro-Line Cylinder Purifiers 3/4″ Connection Fitting

Pro-Line Cylinder Purifiers 3/4″ Connection Fitting

The Pro-Line Cylinder Purifiers 3/4″ Connection Fitting is used to join the pre housing to the purifier. Water purifiers can play a major role in removing unwanted toxins leaving good water quality in the pond and helping to keep your fish healthy. Read more

No reviews yet £2.99 inc. VAT Read more
OASE PhosLess Power Flow 3000 Cartridge
OASE PhosLess Power Flow 3000 Cartridge

OASE PhosLess Power Flow 3000 Cartridge

The filter cartridges from the flow cartridge system use phosphate-storing materials to quickly and effectively remove algae-causing phosphates from the pond water. The phosphate content is lowered below the growth limit for algae thus preventing the growth of algae. An increase in phosphates, for example, due to a bath in the swimming pond or natural pool, are collected immediately. Ultra-smooth glass beads on both sides and the matched cartridge design distribute the water flow around the centrally filled granulate and ensure an optimal storage result. Read more

Features:

  • Accepts up to 150 g of phosphate/PO43- in total
  • The specially refined granulate absorbs available phosphate quickly and effectively; excellent absorption properties up to very low concentrations of significantly less than 0.035 mg/l (minimum for algae growth)
  • Allows phosphate content to be lowered to 0.01 mg/l*2
  • Easy and safe cartridge replacement – screw-on hose connections included
  • Can be installed in or out of the pond
  • Can be retrofitted in all swimming ponds and natural ponds in conjunction with 12 V pumps from OASE
  • Optimal for a flow of between 300 l/h and 3300 l/h. Recommendation: A flow rate of 300 l/h for each 10 m³ of pond volume.
  • To select the right pump, a pressure loss through the cartridge of only about 3 m should be considered.
  • Also suitable for use in classic swimming pools and fountain pools – algae prevention reduces the need for disinfectants
  • Sustainably and safely binds phosphates

Highly-reactive phosphate binder for effective algae prevention.

No reviews yet £618.99 inc. VAT Add to basket
Aquaforte Phospat 1
Aquaforte Phospat 1

Aquaforte Phospat 1

Phosphate is one of the main nutrients for algae (blanket weed) in a pond. With these filter cartridges it is possible to keep the phosphate level below 0,035 mg/l! This is the “magic” limit that is too low for algae to grow but does not harm plants and bacteria. When the cartridge is saturated it must be replaced (re-filling or regenerating is not possible). A great advantage compared to other phosphate binding products is that the Phospat does not release the phosphate at all! The phosphate binding capacities of the Phospat cartridges is 30-100 times more compared to Iron (III) oxides.

Features:

  • Reduces phosphate in water and supports the biofilter
  • Suitable for ponds, natural pools, fountains and circulation wells
  • Adsorption capacity is approximately 90.000 mg (Phospat 1) or 270.000 mg (Phospat 3) phosphate
  • Flow rate up to 1100 l/h (Phospat 1) or 3300 l/h (Phospat 3)
  • Defined particle size of the individual layers
  • Suitable for up to ±50m³ (Phospat 1) or 150m³ (Phospat 3)
  • Several PHOSPATs can be combined for larger volumes of water
  • The Phospat should be protected against contamination with appropriate pre-filtration – Max. working pressure: Phospat 1: 6 bar, Phospat 3: 4 bar

These are 1″ male thread

No reviews yet £543.99 inc. VAT Add to basket
Water Purifier Replacement Pre Filter Cartridges
Water Purifier Replacement Pre Filter Cartridges

Water Purifier Replacement Pre Filter Cartridges

Spun Polypropylene filter cartridges are commonly used due to their superior capacity and efficiency whilst ensuring low pressure drops. This is achieved by a solvent, resin binder and surfactant free construction using nothing but polypropylene, externally finished with thermal bonding. Our cartridges are characterised by excellent sediment absorption of sand, silt, rust and suspended solids. Water purifiers can play a major role in removing unwanted toxins leaving good water quality in the pond and helping to keep your fish healthy. There are 3 different replacement pre filter cartridges available. Read more

Available Sizes:
  • 10″ x 4.5″ 20 Micron Moulded Particle/Sediment Filter
  • 10″ x 2.5″ 20 Micron Pre Filter Cartridge
  • 10″ x 2.5″ 5 Micron Pre Filter Cartridge
No reviews yet Price range: £3.99 through £38.99 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
RP Aquatics Ammonia Block
RP Aquatics Ammonia Block

RP Aquatics Ammonia Block

Ammonia Block (Box of 6) for RP Reactor is a premium-grade media that quickly eradicates poisonous ammonia. It offers faster results than any other product, reliably lasting up to 12 weeks. Perfect for aquariums, this ammonia removal media delivers effective, long-term results. Read more

Features:

  • Safe Start your Aquarium
  • Removes Ammonia Spikes
  • Peace of mind whilst on holiday
  • Can last up to 12 weeks
  • Quick Start a Quarantine Tank
  • Can be used in conjunction with our other products
  • Suitable for all water parameters.

Each pack contains 6 individually sealed 100g pods, sufficient for up to 2000 litres of water.

No reviews yet £40.99 inc. VAT Add to basket
Replacement Dechlorinator GAC Cartridges 20
Replacement Dechlorinator GAC Cartridges

Replacement Dechlorinator GAC Cartridges

The Replacement Dechlorinator GAC Cartridges are available in 10″ and 20″.This cartridge contains activated carbon, which is highly effective at removing chlorine, chloramines, and other impurities from the water. The activated carbon works by adsorption, which means that the impurities stick to the surface of the carbon as the water passes through. Read more

Features:

  • On first use, run water through for a couple of minutes to allow the cartridges to prime.
  • Bring inside in temperatures below 0°c – risk of damage to the unit if it freezes.
  • Available in 10″ and 20″
No reviews yet Price range: £9.95 through £16.90 inc. VAT Select options This product has multiple variants. The options may be chosen on the product page
Burtons 10inch 3 Stage Dechlorinator
Burtons 10″ 3 Stage Dechlorinator

Burtons 10″ 3 Stage Dechlorinator

The Burtons 10″ 3 Stage Dechlorinator is a game-changer for pond owners who want to create a safe and healthy environment for their aquatic friends. This powerful dechlorinator is designed to remove harmful substances from your water supply, such as chlorine, chloramines, and heavy metals, ensuring that your pond water is clean and free from any potential dangers. Read more

Features:

  • Recommended Flow Rate – 6 Litres per minute
  • Lifespan? – Approx 6 Months or 9100 litres – replace all 3 cartridges
  • On first use, run water through for a couple of minutes to allow the cartridges to prime.
  • Bring inside in temperatures below 0°c – risk of damage to the unit if it freezes.
  • 1″ Female BSP Thread
  • Includes all 3 cartridges
No reviews yet £60.00 inc. VAT Add to basket