Description
OASE PhosLess Power Flow 3000 Cartridge
The filter cartridges from the flow cartridge system use phosphate-storing materials to quickly and effectively remove algae-causing phosphates from the pond water. The phosphate content is lowered below the growth limit for algae thus preventing the growth of algae. An increase in phosphates, for example, due to a bath in the swimming pond or natural pool, are collected immediately. Ultra-smooth glass beads on both sides and the matched cartridge design distribute the water flow around the centrally filled granulate and ensure an optimal storage result.
Features:
- Accepts up to 150 g of phosphate/PO43- in total
- The specially refined granulate absorbs available phosphate quickly and effectively; excellent absorption properties up to very low concentrations of significantly less than 0.035 mg/l (minimum for algae growth)
- Allows phosphate content to be lowered to 0.01 mg/l*2
- Easy and safe cartridge replacement – screw-on hose connections included
- Can be installed in or out of the pond
- Can be retrofitted in all swimming ponds and natural ponds in conjunction with 12 V pumps from OASE
- Optimal for a flow of between 300 l/h and 3300 l/h. Recommendation: A flow rate of 300 l/h for each 10 m³ of pond volume.
- To select the right pump, a pressure loss through the cartridge of only about 3 m should be considered.
- Also suitable for use in classic swimming pools and fountain pools – algae prevention reduces the need for disinfectants
- Sustainably and safely binds phosphates
Highly-reactive phosphate binder for effective algae prevention.
Characteristics:
- EFFECTIVE BINDING: Absorbs up to 150 g of phosphate / PO43- in total
- SPECIAL GRANULATE: The binder absorbs available phosphate quickly and effectively, even at concentrations as low as 0.035 mg/l & (minimum level for algae growth)
- PHOSPHATE UNDER CONTROL: Allows phosphate content to be lowered to 0.01 mg/l*2
Technical Data:
| Dimensions (L x W x H) | mm | 480 x 140 x 140 |
| Min. pressure capacity | bar | 0.3 |
| Max. operating pressure | bar | 4 |
| Phosphate binding capacity | g | 150 |
| Max. flow rate | l/h | 3300 |
| Connection | 2 x 50 mm / 2″ | |
| Usage type | Submersed or Inline capable | |
| Max. flow rate AquaMax Eco Premium 6000 / 12 V | l/h | 2000 |
| Max. flow rate AquaMax Eco Premium 12000 / 12 V | l/h | 2400 |
| Max. flow rate AquaMax Eco Premium 5000 | l/h | 2200 |










Reviews
There are no reviews yet