Oase ProfiSkim Wall Standard Stainless Steel Faceplate

Floating Surface Pond Skimmer XL

The floating Surface pond skimmer slides directly over a 160 -110 mm reducer and can than be connected to the pump or filter via a 110 mm tank connector through the pond wall.

The Floating Pond skimmer helps clean the pond surface of all dirt particles. As the skimmer floats it is suitable for most pond depths and self adjusts to changes in the water level.

• Height 280 mm
• Diameter 160mm
• To fit 110 mm Pipe

Standard Black surface skimmer (In-Wall concrete or liner)

Pond Skimmers are a very important and fundamental part of any pond construction, yet are so often overlooked by some pond builders or designers.

Pond Skimmers are designed to remove floating debris, foam bubbles and dust from your pond’s water surface by suction, giving the water a polished look. These easy to install and relatively economical devices can save hours in cleaning and maintenance and really can improve the overall water quality of your pond.

A Standard Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems.

Even if you were considering building a pond indoors you should still install a skimmer because in addition to leaves, they skim off the “Dissolved Organic Compounds” (DOC). Dissolved Organic Compounds will form in any pond, and if not removed will cause an unsightly film and bubbles on the water’s surface. Considering the little amount they cost, the benefits are tremendous.

The Standard Black Surface Skimmer is an important piece of equipment for any pond, but more essentially for the Koi Pond and it is more often forgotten about at the time of constructing the pond: most koi keepers wish they had put one in at the time of construction.

If you are going to build a new Koi pond then please don’t forget to fit one of these surface skimmers, on larger ponds two or more may be needed and these are built into the walls of the pond at the time of construction.

Standard Skimmer Specifications:

• Standard Skimmer for ponds upto 2000gallons
• Flow rate 800 to 1200gph
• Standard Skimmer throat width 190mm
• 1 1/2″ Male Union required
• Standard Skimmer throat width 190mm
• Overall Height = 350MM / Depth = 275MM / Width = 220MM
• Throat Height = 130MM / Width = 145MM
• Front Face (approx) Height = 200MM / Width = 200MM
• Dimension. Forward edge of access cover to Pond Wall = 45mm

https://youtu.be/omazo3fQVU8

Oase Swim Skim 25

Oase skimmers powerfully and effectively remove leaves, pollen and other algae nutrients from the surface, collecting them in the basket. That way, dirt can be removed from the pond ecosystem before it starts to pollute it. The result is clearly improved water quality and viewing depth through direct removal of pollutants on the surface.

Characteristics:

• Integrated injector that enriches the pond with oxygen
• Extremely strong suction
• Easy cleaning with basket removal
• Automatic adaptation to any water level (from 40 cm water depth)
• Powerful suction cleaning of pond surfaces up to 25 m²

https://youtu.be/He2ATlQSe6U