Pro-Line 4″ Aerated Bottom Drain

Tommy Bottom Drains

These Tommy Bottom Drains are perfect for those using mid water feeds to the filter systems and are worried about pulling fish in to the filter, pumps etc. The Tommy Drain has its outlet at the Bottom of the Drain instead of the side of the drain like typical sump bottom drains. The Tommy Drain has a removable lid with stainless Steel screws and a flange ring for fitting to liner or concrete ponds. The Tommy Drain can still be used mounted in the pond base if required, such as for a quarantine system or where the outlet is best suited at the bottom of the drain instead of the side. The Tommy Bottom Drains are suitable for outlets from the side or bottom of your pond or filter. Read more

Available in the following sizes: 40mm, 50mm, 82mm and the most popular 110 mm.

4″ SpinDrifter Aerated Bottom Drain Kit

At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website. Read more

3 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

• 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
• 1 x 3mtr 4″ pressure pipe – PW7078
• 1 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)

6 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

• 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
• 2 x 3mtr 4″ pressure pipe – PW7078
• 2 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)
• 1 x 4″ Straight joiner – PW7081 (07190)
• 1 x 1″ Straight joiner – PW7603 (07184)

9 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

• 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
• 3 x 3mtr 4″ pressure pipe – PW7078
• 3 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)
• 2 x 4″ Straight joiner – PW7081 (07190)
• 2 x 1″ Straight joiner – PW7603 (07184)

If it’s for a liner installation then a flange kit is required and can be added to your basket separately .

https://youtu.be/-ZGL-HGBnXI