Pro Line Cylinder Purifier Replacement Housing (10″ small)

Aquaforte Phospat 3

Phosphate is one of the main nutrients for algae (blanket weed) in a pond. With these filter cartridges it is possible to keep the phosphate level below 0,035 mg/l! This is the “magic” limit that is too low for algae to grow but does not harm plants and bacteria. When the cartridge is saturated it must be replaced (re-filling or regenerating is not possible). A great advantage compared to other phosphate binding products is that the Phospat does not release the phosphate at all! The phosphate binding capacities of the Phospat cartridges is 30-100 times more compared to Iron (III) oxides. Read more

Features:

• Reduces phosphate in water and supports the biofilter
• Suitable for ponds, natural pools, fountains and circulation wells
• Adsorption capacity is approximately 90.000 mg (Phospat 1) or 270.000 mg (Phospat 3) phosphate
• Flow rate up to 1100 l/h (Phospat 1) or 3300 l/h (Phospat 3)
• Defined particle size of the individual layers
• Suitable for up to ±50m³ (Phospat 1) or 150m³ (Phospat 3)
• Several PHOSPATs can be combined for larger volumes of water
• The Phospat should be protected against contamination with appropriate pre-filtration
• Max. working pressure: Phospat 1: 6 bar, Phospat 3: 4 ba

These are 2″ female thread

OASE PhosLess Flow 3000 Cartridge

The filter cartridges from the flow cartridge system use phosphate-storing materials to quickly and effectively remove algae-causing phosphates from the pond water. The phosphate content is lowered below the growth limit for algae thus preventing the growth of algae. An increase in phosphates, for example, due to a bath in the swimming pond or natural pool, are collected immediately. Ultra-smooth glass beads on both sides and the matched cartridge design distribute the water flow around the centrally filled granulate and ensure an optimal storage result. Read more

Features:

• Total binding capacity up to 90 g of phosphate PO43-
• The granulate absorbs available phosphate quickly and effectively; excellent absorption properties up to low concentrations of 0.035 mg/l (minimum for algae growth)
• Ideal for starting at values greater than 0.2 mg/l PO43-
• Intelligent water management in the cartridge enables faster absorption of phosphates with PhosLess
• Optimal for a flow of between 300 l/h and 3300 l/h. Recommendation: A flow rate of 300 l/h for each 10 m³ of pond volume.
• Can be combined with energy-saving pond pumps
• To select the appropriate pump, a pressure loss through the cartridge of only about 3 m should be considered.
• Easy and safe cartridge replacement – screw-on hose connections included
• Can be installed in or out of the pond
• Can be retrofitted in all swimming ponds and natural ponds in conjunction with 12 V pumps from OASE
• Can also be used in fish ponds

Phosphate binder cartridge for reduction of high phosphate values.

Burtons 10″ 3 Stage Dechlorinator

The Burtons 10″ 3 Stage Dechlorinator is a game-changer for pond owners who want to create a safe and healthy environment for their aquatic friends. This powerful dechlorinator is designed to remove harmful substances from your water supply, such as chlorine, chloramines, and heavy metals, ensuring that your pond water is clean and free from any potential dangers. Read more

Features:

• Recommended Flow Rate – 6 Litres per minute
• Lifespan? – Approx 6 Months or 9100 litres – replace all 3 cartridges
• On first use, run water through for a couple of minutes to allow the cartridges to prime.
• Bring inside in temperatures below 0°c – risk of damage to the unit if it freezes.
• 1″ Female BSP Thread
• Includes all 3 cartridges