Profi Heater 3KW
Profi Heater 3KW
The Profi Heater 3kw can be used for heating your pond water. The Profi Heater is equipped with an adjustable thermostat (up to 40 º C). Both the heating element with temperature sensor and the interior of the housing is made of high grade 316L stainless steel. The Profi Heater can be connected by means of a hose (Ø 25, 32 and 40 mm) or PVC tube (Ø 50 and 63 mm). Read more
- Max. pressure: 2 bar.
- Includes: 2 hose tails 25/32/40mm and PVC fittings 50/63mm. 230V.
WARNING: If your system is a PUMP FED system, then you MUST make provisions to be able to REMOVE THE HOSETAILS once per month to enable you to ‘FLUSH’ out the body of the Heater using the normal hose pipe. Failure to do this simple task will cause debris and waste matter to collect on the element which (if not removed) in time may cause the element to burn out.
Refresh Powder
Refresh Powder “The Magic White Soil” is a clay mineral from the Yasawagi district in Akita prefecture, Japan. Those who live in the district used to take this clay as a secret medicine for diarrhea, injury, toothache etc. They call the clay “marvelous soil” or “magic white soil.” Refresh Powder is a wonderful gift from the earth, which can not be produced artificially.
These effective minerals keep water clean and help to supply nutrition dissolving slowly into the water through ion exchanges for excessive materials and bad materials for Koi. These natural workings are necessary elements to keep Koi healthy and improve their color.
Refresh Powder “The Magic White Clay” is a natural clay mineral, found in limited areas in Yasawagi district, in Akita prefecture, Japan. Local villagers who live in this district used this clay personally as a herbal medicine to heal wounds, fight off diarrhoea, toothache and etc. The clay became known as marvellous soil or magic white soil. The efficacy of this white soil is really quite remarkable. Refresh Powder is a wonderful gift from Mother Nature, coming directly from the soil and virtually impossible to reproduce artificially.
It has been proven over the ages, that by dissolving Refresh Powder into the water, the same high quality of life can be reproduced, remaining consistent for a very long time for the benefit of many creatures which inhabit the waters.
Exactly, what is Refresh Powder
Refresh Powder is a mineral composed of Montmorillonite in it’s core and sixteen other necessary minerals such as silicic acid, aluminium, calcium, magnesium, sodium, and iron etc surrounding the core. Collectively, these effective minerals keep the water clean and further help to supply good nutrition, dissolving slowly into the water through an ion exchange system and in the same process lowering the levels of less welcome compounds also dissolving into the water, such as decaying organic materials thus minimising the spread of bacterial diseases.
Refresh Powder is pure natural Montmorillonite and this white clay belongs to a useful group of minerals. If it is mixed with other natural or artificial products certain qualities of the mineral are lost as the balance has now been disturbed. When Koi are bred or raised in waters containing this natural product, the clarity of colours and quality of skin is unsurpassed. When Koi are deprived of this source in lakes lacking in Montmorillonite or man made concrete ponds, colours quickly deteriorate.
Some studies of lakes containing natural clay bottoms clearly reveal that colour and skin quality is more stabilised and defined in such circumstances. This clearly adds weight to the fact that the best ponds usually arise from those with clay bottoms. However, when that clay is of the Montmorillonite source then the visible results from the fish are outstanding. Other clay and stone minerals cannot reproduce the same qualities to that of Refresh Powder natural clay . . . no matter what you are told.
Refresh Powder actually improves water quality and restricts the increase of decaying organic material raising levels of bacterial diseases, thus maintaining our Koi in a much more healthy environment.
So there are valuable options open to us when we keep Koi in concrete or liner ponds. By regular use of Refresh Powder clay in our ponds, we can simulate the same qualities of water found in natural lakes. Essential growth and health is maintained with the presence of natural minerals always being plentiful. The fear of overdosing Refresh Powder in a Koi pond is impossible and regular doses on a weekly basis is highly recommended to achieve maximum efficiency
Refresh Powder is used for improving the white skin and strong colours particularly red and black (sumi). Refresh is also a fantastic way in improving the water quality if used on a regular basis. Water treated with Refresh actually adds a sparkle and improved clarity to the water. Full of minerals and essential vitamins for growth and healthy Koi.
Dosage: 100grams per 1000gallons weekly you may want to double the dose during the first two weeks
Try JPD mud booster clay
Oase 70mm Discharge Pipe 1 Mtr
Oase 70mm Discharge Pipe 1 Mtr
- This is the Oase DN75 Discharge pipework for use with the Oase Biosmart, Biotec, Filtomatic and ScreenMatic Pond Filters.
- The pipework is 70mm in diameter and uses a push fit system for simple and easy water tight seals.
- Use in conjunction with other DN75 Discharge pipework to make a complete water return from the filter.
The choice of which type of pipework to use has always been a dilemma.
At Cotswold Koi we understand The importance of pipe work, mistakes made in pipework are one of the most common we come across and can be very costly and hard to change at a later date.
There are three main types of pipe work used on koi ponds:
- Metric Pressure Pipe
- Imperial Pressure Pipe
- Black waste pipe
The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Cotswold Koi we are looking to bring you a full range of pipe fittings for every occasion.
we are happy to provide assistance, should you need it, please Contact Us if you need assistance in choosing the right pipe work for your project.
Oase 70mm Discharge Pipe 45 Degree Bend
Oase 70mm Discharge Pipe 45 Degree Bend
- This is the Oase DN75 Discharge pipework for use with the Oase Biosmart, Biotec, Filtomatic and ScreenMatic Pond Filters.
- The pipework is 70mm in diameter and uses a push fit system for simple and easy water tight seals.
- Use in conjunction with other DN75 Discharge pipework to make a complete water return from the filter.
The choice of which type of pipework to use has always been a dilemma.
At Cotswold Koi we understand The importance of pipe work, mistakes made in pipework are one of the most common we come across and can be very costly and hard to change at a later date.
There are three main types of pipe work used on koi ponds:
- Metric Pressure Pipe
- Imperial Pressure Pipe
- Black waste pipe
The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Cotswold Koi we are looking to bring you a full range of pipe fittings for every occasion.
we are happy to provide assistance, should you need it, please Contact Us if you need assistance in choosing the right pipe work for your project.
Oase 70mm Discharge Pipe 48cm
Oase 70mm Discharge Pipe 48cm
- This is the Oase DN75 Discharge pipework for use with the Oase Biosmart, Biotec, Filtomatic and ScreenMatic Pond Filters.
- The pipework is 70mm in diameter and uses a push fit system for simple and easy water tight seals.
- Use in conjunction with other DN75 Discharge pipework to make a complete water return from the filter.
The choice of which type of pipework to use has always been a dilemma.
At Cotswold Koi we understand The importance of pipe work, mistakes made in pipework are one of the most common we come across and can be very costly and hard to change at a later date.
There are three main types of pipe work used on koi ponds:
- Metric Pressure Pipe
- Imperial Pressure Pipe
- Black waste pipe
The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Cotswold Koi we are looking to bring you a full range of pipe fittings for every occasion.
we are happy to provide assistance, should you need it, please Contact Us if you need assistance in choosing the right pipe work for your project.
Oase 70mm Discharge Pipe 90 Degree Bend
Oase 70mm Discharge Pipe 90 Degree Bend
- This is the Oase DN75 Discharge pipework for use with the Oase Biosmart, Biotec, Filtomatic and ScreenMatic Pond Filters.
- The pipework is 70mm in diameter and uses a push fit system for simple and easy water tight seals.
- Use in conjunction with other DN75 Discharge pipework to make a complete water return from the filter.
The choice of which type of pipework to use has always been a dilemma.
At Cotswold Koi we understand The importance of pipe work, mistakes made in pipework are one of the most common we come across and can be very costly and hard to change at a later date.
There are three main types of pipe work used on koi ponds:
- Metric Pressure Pipe
- Imperial Pressure Pipe
- Black waste pipe
The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Cotswold Koi we are looking to bring you a full range of pipe fittings for every occasion.
we are happy to provide assistance, should you need it, please Contact Us if you need assistance in choosing the right pipe work for your project.
Oase 70mm Discharge Pipe Tee
Oase 70mm Discharge Pipe Tee
- This is the Oase DN75 Discharge pipework for use with the Oase Biosmart, Biotec, Filtomatic and ScreenMatic Pond Filters.
- The pipework is 70mm in diameter and uses a push fit system for simple and easy water tight seals.
- Use in conjunction with other DN75 Discharge pipework to make a complete water return from the filter.
The choice of which type of pipework to use has always been a dilemma.
At Cotswold Koi we understand The importance of pipe work, mistakes made in pipework are one of the most common we come across and can be very costly and hard to change at a later date.
There are three main types of pipe work used on koi ponds:
- Metric Pressure Pipe
- Imperial Pressure Pipe
- Black waste pipe
The use of anything other than pressure pipe and fittings for both gravity and pressure lines is risky, the last thing you want is your bottom drain line leaking after all your hard work building your pond and is only a cost saving exercise, The added security and peace of mind that Pressure Pipe brings is well worth the extra cost. Unfortunately the use of pressure pipe and fittings in the past has simply been too expensive for the majority of Koi keepers, despite it being the preferred choice. here at Cotswold Koi we are looking to bring you a full range of pipe fittings for every occasion.
we are happy to provide assistance, should you need it, please Contact Us if you need assistance in choosing the right pipe work for your project.
Spindrifter Aerated Drain lid
Spindrifter Aerated Drain lid
The Spindrifter Aerated Drain lid replaces the standard dome on your 4″ bottom drain. The unit has a wide diameter rubber insert with thousands of tiny holes to allow the air flow to come out.
The air line supply can either be inserted inside the length of the bottom drain pipe – coming out at a convenient place near to where your Air pump will be situated, or it can, be simply run across the base of the pond to your Air pump.
stem fits 1.5″ pressure
- Ideal for all types of bottom drains if used in conjunction with the correct adaptors.
- EDPM rubber membrane which can be replaced.
- Suitable for up to 80 ltrs of air at 6ft depth.
Standard Black Surface Skimmer
Standard Black surface skimmer (In-Wall concrete or liner)
A Standard Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems. Read more
Standard Skimmer Specifications:
- Standard Skimmer for ponds upto 2000gallons
- Flow rate 800 to 1200gph
- Standard Skimmer throat width 190mm
- 1 1/2″ Male Union required
- Standard Skimmer throat width 190mm
- Overall Height = 350MM / Depth = 275MM / Width = 220MM
- Throat Height = 130MM / Width = 145MM
- Front Face (approx) Height = 200MM / Width = 200MM
- Dimension. Forward edge of access cover to Pond Wall = 45mm
https://youtu.be/omazo3fQVU8
Filtreau Drum Filter Wash Pump
Replacement wash pump for Filtreau Drum
This self-priming pump is equipped with a jet hydraulic system, an on/off switch and a maintenance-free capacitor motor with thermal overload protection. Read more
Wide Mouth Black Surface Skimmer
Wide Mouth Black Surface Skimmer (In-Wall concrete or liner)
A Wide Mouth Black Surface Skimmer can make all the difference between enjoying a pond and beginning to resent it. A properly functioning skimmer will collect leaves and anything else that lands on the surface of your pond and collect it into a basket, where it can be easily disposed of. Without a pond skimmer you are sentenced to a life of continually having to clean and remove debris from the pond’s surface. In addition, pond skimmers will remove all this debris before it has a chance to sink and degrade, help to improve the general water quality and aid in the prevention of extra strain being placed on our filtration systems. Read more
Standard Wide Angle Skimmer Specifications:
- Wide Angle Skimmer for ponds upto 4000gallons
- Flow rate 1500 to 2000gph
- Wide Angle Skimmer throat width 350mm
- 1 1/2″ Male Union required
- Standard Wide Angle Skimmer Specification
- Overall Height = 350MM / Depth= 325MM / Width = 355MM.
- Throat Height= 130MM / Width= 295MM
- Front Face (approx) Height = 190MM / Width = 355MM
- Dimension. Forward edge of access cover to Pond Wall = 130mm