These AquaForte ‘O’ Plus Vario Pond Pumps have been specially developed for immersion in the pond under water. The ‘0’ Plus Vario pump can be controlled in 22 stages via the external control unit and can be switched on or off using the start / stop button. With the external controller, you can adjust the flow (and thus also the power consumption) of 30% to 100% power.
AquaForte ‘O’ Plus Vario 10000
AquaForte ‘O’ Plus Vario 10000
The Aqua Forte ‘O’ Plus Vario 10000 Pond Pump has been specially developed for underwater applications. With the external controller you can adjust the flow (and thus the energy consumption) from 30% to 100%. The controller can also start/stop the pump (pause button). Provided with synchronous motor and weatherproof ceramic shaft for long time use. Automatic power-off protection when running dry. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out. Read more
Features:
- The Aqua Forte Vario pond pumps are very quiet.
- The Aqua Forte Vario pump is ideal for fresh and salt water.
- The Aqua Forte ‘O’ Plus series does not contain copper parts.
- All pumps are equipped with a wear-resistant, ceramic axle.
- The Aqua Forte ‘O’ Plus pond pump switches off automatically if there is no water in the rotor (dry-running protection).
- When the impeller is blocked, the pump is blocked, which means that no further current is consumed until the blocking is released again.
- Suitable for streams, waterfalls, fountains, filters, etc.
- Also suitable for dry installation (inlet must be below the water level, since not self-priming!).
- Can promote dirt particles up to 6 mm.
AquaForte ‘O’ Plus Vario 22000
AquaForte ‘O’ Plus Vario 22000
The Aqua Forte ‘O’ Plus Vario 22000 Pond Pump has been specially developed for underwater applications. With the external controller you can adjust the flow (and thus the energy consumption) from 30% to 100%. The controller can also start/stop the pump (pause button). Provided with synchronous motor and weatherproof ceramic shaft for long time use. Automatic power-off protection when running dry. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out. Read more
Features:
- The Aqua Forte Vario pond pumps are very quiet.
- The Aqua Forte Vario pump is ideal for fresh and salt water.
- The Aqua Forte ‘O’ Plus series does not contain copper parts.
- All pumps are equipped with a wear-resistant, ceramic axle.
- The Aqua Forte ‘O’ Plus pond pump switches off automatically if there is no water in the rotor (dry-running protection).
- When the impeller is blocked, the pump is blocked, which means that no further current is consumed until the blocking is released again.
- Suitable for streams, waterfalls, fountains, filters, etc.
- Also suitable for dry installation (inlet must be below the water level, since not self-priming!).
- Can promote dirt particles up to 6 mm.