Oase Replacement Fleece 750
Oase Replacement Fleece 750
This genuine OASE spare 3 micron Filter Fleece is simple to replace on the new ProfiClear Fleece 750 pond filter module.
Oase Solenoid Valve 1″ 24 V
Oase Solenoid Valve 1″ 24 V
The Oase Solenoid Valve 1″ 24 V For automatic regulation of the water level.
Oase Swim Skim 25 Replacement Foam
Oase Swim Skim 25 Replacement Foam
This is a Replacement Foam for the Oase SwimSkim 25 Pond Skimmer.
Oase Swim Skim 25 Spare Parts
Oase Swim Skim 25 Spare Parts
This a full list of spares for the Oase Swim Skim 25. Please see the diagram and part number and select the number in the drop down box.
Parts:
- 1 SwimSkim 25 Float 29613
- 2 SwimSkim 25 with weight ASM basket 10450
- 3 SwimSkim 25 Foam 29445
- 4 SwimSkim 25 skimmer flap 15656
- 5 SwimSkim 25 ASM pump housing ASE 2500 35770
- 6 SwimSkim 25 Spare rotor cpl. ASE 2500 magnetized 18013
- 7 SwimSkim 25 Pump chamber 29179
- 8 SwimSkim 25 Air distributor 29458
- 9 SwimSkim 25 ASM venturi 35747
Oase Swim Skim 50 Replacement Foam
Oase Swim Skim 50 Replacement Foam
This is a Replacement Foam for the Oase SwimSkim 50 and CWS Pond Skimmers.
Oase Swim Skim 50 Spare Parts
Oase Swim Skim 50 Spare Parts
This a full list of spares for the Oase Swim Skim 50. Please see the diagram and part number and select the number in the drop down box.
- 1 SwimSkim 50 ASM basket 12497
- 2 SwimSkim 50 Spare part additional pack 12499
- 3 SwimSkim 50 Filter box 12021
- 4 SwimSkim 50 Float 11466
- 5 SwimSkim 50 Pump chamber 11328
- 6 SwimSkim 50 Foam 12433
- 7 AquaMax Eco Classic 3500 11825
- 8 SwimSkim 50 O-Ring NBR 60 x 2.5 SH70 A 25969
- 9 AquaMax Eco Classic 3500 Spare rotor 21912
- 10 SwimSkim 50 Oval head screw V2A DIN 7985 M5 x 20 H 6055
- 11 SwimSkim 50 Spike 20284
Oase UV Replacement Bulbs
Oase UV Replacement Bulbs
The Oase UV Replacement Bulbs are characterized by there high quality. Since the UVC clarifier is mostly in constant use, the effect can wear off after approx. 8000 hours. It is therefore recommended that the lamps be replaced at regular intervals. It is best to think about this in spring so that your clarifier is ready for the whole pond season. These are available in 7 different sizes.
Sizes:
- 11w
- 13w
- 18w
- 24w
- 36w
- 55w
- 60w
Oase Vitronic 11W Spare Parts
Oase Vitronic 11W Spare Parts
This a full list of spares for the Oase Vitronic 11w. Please see the diagram and part number and select the number in the drop down box.
Parts:
- 1 Oase Vitronic 11w Ballast Unit 15665
- 2 Oase Vitronic 11w Replacement Bulb 56112
- 3 Oase Vitronic 11w Replacement Quartz 13312
- 4 Oase Vitronic 11w Clip And Bolt Sealing Kit 15535
- 5 Oase Vitronic 11w Spare Part Set 27576
- 6 Oase Vitronic 11w Replacement Body 88470
Oase Vitronic 18W Spare Parts
Oase Vitronic 18W Spare Parts
This a full list of spares for the Oase Vitronic 18w. Please see the diagram and part number and select the number in the drop down box.
Parts:
- 1 Oase Vitronic 18w Ballast Unit 35839
- 2 Oase Vitronic 18w Replacement Bulb 56236
- 3 Oase Vitronic 18w Replacement Quartz 21763
- 4 Oase Vitronic 18w Clip And Bolt Sealing Kit 15748
- 5 Oase Vitronic 18w Replacement Body 22206
- 6 Oase Vitronic 18w Spare Part Set 35877
- 7 Oase Vitronic 18w Flat gasket hose tail 1 1/2″ 19491
- 8 Oase Vitronic 18w Cap nut 20 mm G 1 1/2″ 15445
Oase Vitronic 24W Spare Parts
Oase Vitronic 24W Spare Parts
This a full list of spares for the Oase Vitronic 24w. Please see the diagram and part number and select the number in the drop down box.
Parts:
- 1 Oase Vitronic 24w Ballast Unit 22219
- 2 Oase Vitronic 24w Replacement Bulb 56237
- 3 Oase Vitronic 24w Replacement Quartz 21763
- 4 Oase Vitronic 24w Clip And Bolt Sealing Kit 15748
- 5 Oase Vitronic 24w Replacement Body 22206
- 6 Oase Vitronic 24w Spare Part Set 35877
- 7 Oase Vitronic 24w Flat gasket hose tail 1 1/2″ 19491
- 8 Oase Vitronic 24w Cap nut 20 mm G 1 1/2″ 15445
Oase Vitronic 36W Spare Parts
Oase Vitronic 36W Spare Parts
This a full list of spares for the Oase Vitronic 36w. Please see the diagram and part number and select the number in the drop down box.
Parts:
- 1 Oase Vitronic 36w Ballast Unit 35840
- 2 Oase Vitronic 36w Replacement Bulb 55432
- 3 Oase Vitronic 36w Replacement Quartz 21763
- 4 Oase Vitronic 36w Clip And Bolt Sealing Kit 15748
- 5 Oase Vitronic 36w Replacement Body 22206
- 6 Oase Vitronic 36w Spare Part Set 35877
- 7 Oase Vitronic 36w Flat gasket hose tail 1 1/2″ 19491
- 8 Oase Vitronic 36w Cap nut 20 mm G 1 1/2″ 15445
Oase Vitronic 55W Spare Parts
Oase Vitronic 55W Spare Parts
This a full list of spares for the Oase Vitronic 55w. Please see the diagram and part number and select the number in the drop down box.
Parts:
- 1 Oase Vitronic 55w Ballast Unit 35841
- 2 Oase Vitronic 55w Replacement Bulb 56636
- 3 Oase Vitronic 55w Replacement Quartz 13331
- 4 Oase Vitronic 55w Clip And Bolt Sealing Kit 15748
- 5 Oase Vitronic 55w Replacement Body 35797
- 6 Oase Vitronic 55w Spare Part Set 35877
- 7 Oase Vitronic 55w O-Ring NBR 40 x 3 SH70 A 3555
- 8 Oase Vitronic 55w Inspection glass Vitronic 29421
- 9 Oase Vitronic 55w Coupling nut 1 1/2″ 12096
Oase Water level Sensor 20-3
Oase Water level Sensor 20-3
OASE water-level sensors ensure reliable control of the water level and thus prevent the pool from overflowing. The Water-Level Sensor 2000-3/5 is designed for greater level differences of approximately 50 to 2000 mm, such as occur in water reservoirs.
The stainless steel housings of the Water-Level Sensor 20-3 and 20-4 also take on the function of the common electrode. The minimum and maximum electrodes are in the housing. The permanently set level difference is 20 mm. In addition the 20-4 has a dry-run protection electrode.
It can be retrofitted with a dry run protection electrode. The electrodes can be adjusted according to the level differences via the cable length. They give switch on and switch off commands to regulate the water level or to protect the pump technology (Supplemental electrode 2000-1).
Replacement Electrics For TMC Pro Pond UV 110
Replacement Electrics For TMC Pro Pond UV 110
The TMC Pro Pond 110 watt replacement electric packs are supplied all pre-wired and ready to use. They are supplied with 3 metres of power cable and come with the white end caps pre fitted with outer blue cover. The TMC Pro Pond 110 watt replacement electric packs cables numbered and colour coded for ease of installation.
Replacement Lamp For T5 Submersible 75W UVC – Red End
Replacement Lamp For T5 Submersible 75W UVC – Red End
This is one of the most integral parts of your overall filtration system, yet we often forget to maintain it as time goes by.
You should replace the UV lamp in your UV unit every year.
Although the lamp may still burn, it no longer emits the right UV radiation.
UV Replacement Lamps
Be sure to clean the quartz glass of the unit carefully before installing the new lamp to optimise the light transmission.
Important Note: When ordering UV lamps please make sure you open the box to make sure the lamps are not broken before signing the delivery note, if the bulbs are damaged please sign the delivery note “Damaged” and refuse delivery.
A claim will ONLY be accepted if signed for as DAMAGED.
If you have any questions regarding our ultraviolet lights, please do not hesitate to contact us.
Suitable for :
- X-Clear Budgetflex T5 75w
- X-Clear Ultraflex T5 75w
- T5 Submersible 75w
Replacement Quartz sleeve for EazyPod UV
Replacement Quartz sleeve for Eazy Pod UV
This is a genuine Evolution Aqua EazyPod Replacement Quartz Sleeve for use with the Evolution Aqua EazyPod UV Automatic and EazyPod Complete models.
Superfish Koi Flow Service Kits
Superfish Koi Flow Service Kits
These are genuine Replacement Complete Service Kits For Superfish Koi Flow Air pumps.
- Koi Flow 20
- Koi Flow 30
- Koi Flow 60
Surge Inlet Clear Hosetail
Surge Inlet Clear Hosetail
This Surge Inlet Clear Hosetail is a genuine Evolution Aqua replacement part. This is to be used in conjunction with the Evolution Aqua Surge Filter.
Surge Waste Valve Assembly
Surge Waste Valve Assembly
This is a genuine Evolution Aqua Surge Waste Valve Assembly replacement part and is suitable for the Evolution Aqua Surge Filter.
T5 Submersible 40-75W UVC Replacement Quartz Sleeve
T5 Submersible 40-75W UVC Replacement Quartz Sleeve
Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss.
Benefits
- These lamps can be used in filter tanks so the water can pass without any resistance/ pressure loss.
- The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in a tank.
- A special tank connector is available for direct installation in i.e. filters.
Note:
- This product is only intended for professional use.
- It should be installed in a professional application or assembled with other appliances.
- Before using this product the installer/user must take care the product complies to the latest European standards for UV-C units.
- Immersion UV-C
T5 Submersible 40-75W UVC Replacement Quartz Sleeve and not the complete unit
T5 Submersible 40W UVC Replacement Bulb
T5 Submersible 40W UVC Replacement Bulb
Submersible UV-C lamps have a big advantage compared to conventional UV-C units: no pressure loss.
Benefits
- These lamps can be used in filter tanks so the water can pass without any resistance/ pressure loss.
- The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in a tank.
- A special tank connector is available for direct installation in i.e. filters.
Note:
- This product is only intended for professional use.
- It should be installed in a professional application or assembled with other appliances.
- Before using this product the installer/user must take care the product complies to the latest European standards for UV-C units.
- 40W Immersion UV-C
T5 Submersible 40W UVC Replacement Bulb and not the complete unit
Tempest Waste Valve Assembly
Tempest Waste Valve Assembly
This is a genuine Evolution Aqua replacement part and is suitable for the new upgraded Evolution Aqua Tempest or can be retrofitted with the previous Tempest version.
New Tempest Waste Valve Assembly:
- Robust and reliable double union ball valves
- Handle can be used to adjust the tightness of the seal
- New air inlet with valve for better control and reliability
- Can be retrofitted to the existing and upgraded Tempest model
TMC Ballast Replacements
TMC Pro Clear UVC Ballast Replacement 30w/55w
The TMC Pro Clear UV 30 watt & 55 watt units require virtually no maintenance and are designed for reliability and a long working life of approximately 7000 hours and only needs to be replaced once a year.
As an added benefit the TMC Pro Clear UV 30 watt & 55 watt is fitted with unique translucent hose tails, which glow when the UV lamp is working.
Spare parts and replacement lamps for the TMC Pro Clear UV 30 watt & 55 watt are always readily available.
The TMC Pro Clear UV 30 watt & 55 watt uses clean and efficient ultraviolet light to destroy the green, single-celled algae which make garden ponds murky and unattractive. As no chemicals are used, there is no danger of pollution or over treatment of the water and sensitive plant and pond life is not affected.
TMC Pro Pond UV Quartz Sleeves
TMC Pro Pond UV Quartz Sleeves
For those Koi and pond enthusiasts who are not as careful as they might be, we do also sell the spare TMC Pro Pond UV Quartz Sleeves in the most standard sizes.
The TMC Pro Pond UV Quartz Sleeve insulates the lamp from the water, allowing the lamp to operate at the optimum performance.
The ultraviolet lamp will remain independent of the flow of water. The TMC Pro Pond UV Quartz Sleeves are of open ended construction and are made from pure fused quartz.
Quartz is extremely transparent over a wide spectral range, with a low coefficient of thermal expansion and quartz is resistant to scratching and thermal shock. Fused quartz is made form crushing and melting natural materials. The purity of quartz is paramount to the efficiency of the lamp and sleeve.
TMC Quartz Sleeve Dimensions:
15w/25w
- Overall length 415mm
- External diameter 30mm
- Internal diameter 27mm
30w/55w
- Overall length 870mm
- External diameter 30mm
- Internal diameter 27mm
TMC UV Replacement Bulbs
TMC UV Replacement Bulbs
The TMC Replacement UV Bulbs are available for the whole range of the TMC pond UV clarifiers. The T8 Bulbs are available in 2 different wattages with the 110w model requiring 2x 55w Bulbs. Since the UVC clarifier is mostly in constant use, the effect can wear off it is therefore recommended that the lamps be replaced at regular intervals. It is best to think about this in spring so that your clarifier is ready for the whole pond season.
Please Note these are NOT Genuine TMC Bulbs they are Phillips
Sizes Available:
- 30w Bulb Length 892mm
- 55w Bulb Length 892mm
- 110w Bulb Length 2x 892mm
Valterra Slide Valve Replacement Washers
Valterra Slide Valve Replacement Washers
The Valterra Slide Valve Replacement Washers are sold singly. These are available in 4″/110mm, 3″, 2″ and 1.5″. Unfortunately after time the seals in the slide valves tend to leak and need to be replaced.
Sold Singly
Yamitsu Algae Master Pond UV Clarifier Replacement Electrics
Yamitsu Algae Master Pond UV Clarifier Replacement Electrics
Yamitsu algae master uv’s are made from UV stabilised materials to ensure a longer life and incorporate turbulators to enhance the unit’s performance. Large inlet and exhaust ports make the algae master uv suitable for a wide range of pond uv applications. It is recommended that the algae master uv should be installed using solid solvent weld pipe.
However, all algae master uv’s come complete with free (glue in) hosetails enabling them to be connected to ½”, ¾”, 1″, 1¼” and 1½” flexible pipe. Algae master uv’s will also fit most popular 1½” household solvent weld waste and pressure pipes.
Yamitsu Algae Master Pond UV Clarifier Installation
If you have a severe algae problem you should effect a partial water change before starting the installation. Yamitsu Algae Master Pond UV can be added to any existing filtration system. For best results algae master units should be fitted in line, after the pump, with water being forced through them. Use the largest size of pipe possible. If hosetails are to be used, it is very important that they are trimmed to the largest possible size that will fit inside the flexible pipe (before glueing in place). This will ensure that the maximum flow rate can be obtained for the size of pipe.
Yamitsu Algae Master UV Maintenance
Although maintenance is minimal all UV lamps need replacing at six monthly intervals. The algae master’s uv lamp may be illuminated and appear to be working but the radiation dosage diminishes with age and is ineffective after six months. Dispose of used uv lamps sensibly. Even exhausted uv lamps should NEVER be looked at directly when illuminated.
As the algae master uv is dependant upon water passing through it, it is important to ensure that any pump strainers, pre-filters or delivery pipes are not blocked or are causing the flow to be restricted.
|
||||||||||||||
This is the Yamitsu Algae Master Pond UV Clarifier Replacement Electrics and not the actual unit !
Yamitsu Algae Master Pond UV Replacement Bodys
Yamitsu Algae Master Pond UV Replacement Bodys
The Yamitsu Algae Master Pond UV Replacement Bodys are genuine replacements. These are available in four different sizes for the whole range.