Aquadrift Liner Flange Kit

Economy Bottom Drains With Ring Aerator

These Economy Bottom Drains With Ring Aerator are well made and are suited for use with 110mm or 50mm waste pipe. The dome is removable with a large integral surface mounted air ring diffuser around the outer edge. Not only does the aeration benefit your pond and your fish but it also helps with pulling debris into your sump making it more effective. The aerator is fitted with an air input tee that will accept flexible airline with an internal diameter (ID) of 4mm. Read more

We cannot express the importance of installing a bottom drain when planning and building your pond and these drains provide a cost effective way of doing this.

This kit comes supplied with 10 meters of flexible clear PVC airline (4mmID-6mmOD)

Available in 50mm and 110mm .

Pro-Line 4″ Aerated Bottom Drain Kit

At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website. Read more

3 mtr Pro-Line Aerated Bottom Drain Kit Includes :

• 1 x 4″ Pro-Line Bottom Drain – AP520
• 1 x 3mtr 4″ pressure pipe – PW7078
• 1 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)

6 mtr Pro-Line Aerated Bottom Drain Kit Includes :

• 1 x 4″ Pro-Line Bottom Drain – AP520
• 2 x 3mtr 4″ pressure pipe – PW7078
• 2 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)
• 1 x 4″ Straight joiner – PW7081 (07190)
• 1 x 1″ Straight joiner – PW7603 (07184)

9 mtr Pro-Line Aerated Bottom Drain Kit Includes :

• 1 x 4″ Pro-Line Bottom Drain – AP520
• 3 x 3mtr 4″ pressure pipe – PW7078
• 3 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)
• 2 x 4″ Straight joiner – PW7081 (07190)
• 2 x 1″ Straight joiner – PW7603 (07184)

4″ SpinDrifter Aerated Bottom Drain Kit

At Cotswold koi We understand that sometimes it can be confusing as to knowing what equipment you require to install a bottom drain, So we have put together this kit which will make your life a 100% easier. We find most filter bays are within a 3,6 or 9 meter distance from the bottom drain location so we have grouped together all the products that you require to install a bottom drain effectively without the headache. You can choose from either 1, 2 or 3 lengths of the required pipework to enable you to achieve most drainage Requirements. Should any further pipe work or fittings be required they can also be added via the pipework section on the website. Read more

3 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

• 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
• 1 x 3mtr 4″ pressure pipe – PW7078
• 1 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)

6 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

• 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
• 2 x 3mtr 4″ pressure pipe – PW7078
• 2 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)
• 1 x 4″ Straight joiner – PW7081 (07190)
• 1 x 1″ Straight joiner – PW7603 (07184)

9 mtr SpinDrifter Aerated Bottom Drain Kit Includes :

• 1 x 4″ Aerated Bottom drain and Lid Includes direct air feed kit – AP4451
• 3 x 3mtr 4″ pressure pipe – PW7078
• 3 x 3mtr 1″ pressure pipe – PW7601
• 1 x 4″ 90 degree pressure swept bend – PW7645
• 1 x 1″ 90 degree pressure bend – PW7088 (07139)
• 2 x 4″ Straight joiner – PW7081 (07190)
• 2 x 1″ Straight joiner – PW7603 (07184)

If it’s for a liner installation then a flange kit is required and can be added to your basket separately .

https://youtu.be/-ZGL-HGBnXI