Seneye Float Accessory

NT Labs Hardness Test Kit

NT Labs Hardness Test Kit – Comprehensive Monitoring for Your Pond’s Water Quality

Understanding KH (Carbonate Hardness): KH, also known as “total alkalinity” or “carbonate hardness,” measures the buffering capacity of your pond water. This capacity indicates how well the water can resist changes in pH.

What is the Correct KH Level? Maintain a minimum KH level of 4 dKH at all times, with a more desirable range between 6 and 8 dKH. This test kit measures KH in dKH, where one dKH equals 17.8 ppm as CaCO3.

What to Do if the KH Level is Wrong:

• Check the KH level of your tap water. Regular water changes are sufficient if the tap water KH is above 6 dKH.
• If tap water KH is below 6 dKH, use a KH buffer like KH – Buffer Up to maintain a suitable level in your pond.

How to Use the KH Test:

1. Ensure the test tube is clean.
2. Collect a 5 ml water sample into the test tube.
3. Add one drop of the KH reagent, mix, and observe the pale blue colour.
4. Continue adding drops, one by one, mixing between drops until the colour changes from blue to yellow.
5. The number of drops needed for the colour change equals the KH value in dKH.

Understanding GH (General Hardness): GH measures the total minerals dissolved in water, with water hardness ranging from ‘soft’ to ‘hard’ based on mineral content. Hard water can lead to limescale build-up.

What is the Correct GH Level? For pond fish, the ideal GH level is between 8 and 12 dGH. This test kit measures GH in dGH, where one degree equals 17.8 ppm as CaCO3.

What to Do if the GH Level is Wrong:

• Test the GH of your tap water. If too hard, consider using alternative water sources like reverse osmosis water to lower GH.
• In ponds, where rainwater may lower GH over time, use GH & Minerals Up to boost GH to a suitable level.

How to Use the GH Test:

1. Ensure the test tube is clean.
2. Collect a 5 ml water sample into the test tube.
3. Add two drops of GH A reagent, mix, and observe the dark pink colour.
4. Add one drop at a time of GH B reagent, counting the drops between mixing until the solution changes from pink to blue.
5. The number of drops needed for the colour change equals the GH value in dGH.

Maintain the balance of KH and GH in your pond with NT Labs Hardness Test Kit, ensuring optimal water quality and a healthy environment for your fish. Trust NT Labs for precise water testing solutions.

NT Labs Broad PH Test Kit

NT Labs Broad pH Test Kit – Precision for Your Pond’s pH Balance

Understanding pH: The NT Labs Broad Range pH Test Kit is specially designed for testing water within the pH range of 6 – 9, covering the pH spectrum commonly observed in ponds. With enhanced precision offering 0.5 unit determination, this test ensures accurate monitoring of your pond’s pH levels.

Correct pH Level: While there is no universally correct pH level, different fish species have their preferred pH ranges. Generally, the ideal pH value falls between 7 and 8, but it’s essential to consider the specific requirements of the fish you own. Always inquire about the preferred water conditions when purchasing fish from your local aquatic retailer.

What to Do if the pH Level is Off:

• If adjustments are necessary, make changes slowly to avoid shocking the fish. Limit pH adjustments to no more than 0.5 units every 2 days.
• Conduct substantial water changes if your tap water has a suitable pH to correct dangerous pH levels.
• Check the KH (carbonate hardness) of the pond. Use pH adjusters like KH – Buffer Up to raise pH caused by soft or aged water.
• For fish in soft, acid water, consider using bogwood to gently lower the pH and soften the water.

How to Use:

1. Ensure the test tube is clean.
2. Collect a 5ml water sample into the test tube.
3. Add 5 drops of the pH reagent, replace the test tube cap, and shake thoroughly.
4. Compare the colour of your sample to the provided colour scale for an accurate pH reading.

Maintain the optimal pH balance in your pond with the NT Labs Broad pH Test Kit. With improved precision and a broad testing range, this kit empowers you to create the perfect environment for your fish. Trust NT Labs for reliable water testing solutions, ensuring the health and happiness of your aquatic companions.

iDip Total Alkalinity Test Strips

iDip Total Alkalinity Test Strips for our handy water quality tester. Bottle of 100 test strips for use with eXact series photometers to test for the presence of Alkaline in the water.

• Not to be used as a standalone water test.
• No of Tests: 100