Water Purifier Replacement Carbon

Oase Secure Flow 3000

The Oase Secure Flow 3000 has been designed to provide an in-line pre-filter cartridge for the Oase Phosless Flow 3000 and Oase Phosless Power Flow 3000. The Secure Flow must be used when pre-filtered water is not available. Read more

Features:

• Required if filtered water is not available
• Additional protection of the PhosLess cartridges against contamination
• Equipped with polished glass filter beads with excellent backflush properties
• The pre-filter cartridge is easy to clean – for backflushing, simply reverse the direction of the flow
• Can be combined with energy-saving pond pumps
• In combination with a PhosLess Flow or PhosLess Power Flow cartridge, a combined pressure loss of only about 4 m must considered.
• Can be combined with energy-saving pond pumps

Aquaforte Phospat 1

Phosphate is one of the main nutrients for algae (blanket weed) in a pond. With these filter cartridges it is possible to keep the phosphate level below 0,035 mg/l! This is the “magic” limit that is too low for algae to grow but does not harm plants and bacteria. When the cartridge is saturated it must be replaced (re-filling or regenerating is not possible). A great advantage compared to other phosphate binding products is that the Phospat does not release the phosphate at all! The phosphate binding capacities of the Phospat cartridges is 30-100 times more compared to Iron (III) oxides.

Features:

• Reduces phosphate in water and supports the biofilter
• Suitable for ponds, natural pools, fountains and circulation wells
• Adsorption capacity is approximately 90.000 mg (Phospat 1) or 270.000 mg (Phospat 3) phosphate
• Flow rate up to 1100 l/h (Phospat 1) or 3300 l/h (Phospat 3)
• Defined particle size of the individual layers
• Suitable for up to ±50m³ (Phospat 1) or 150m³ (Phospat 3)
• Several PHOSPATs can be combined for larger volumes of water
• The Phospat should be protected against contamination with appropriate pre-filtration – Max. working pressure: Phospat 1: 6 bar, Phospat 3: 4 bar

These are 1″ male thread

OASE PhosLess Power Flow 3000 Cartridge

The filter cartridges from the flow cartridge system use phosphate-storing materials to quickly and effectively remove algae-causing phosphates from the pond water. The phosphate content is lowered below the growth limit for algae thus preventing the growth of algae. An increase in phosphates, for example, due to a bath in the swimming pond or natural pool, are collected immediately. Ultra-smooth glass beads on both sides and the matched cartridge design distribute the water flow around the centrally filled granulate and ensure an optimal storage result. Read more

Features:

• Accepts up to 150 g of phosphate/PO43- in total
• The specially refined granulate absorbs available phosphate quickly and effectively; excellent absorption properties up to very low concentrations of significantly less than 0.035 mg/l (minimum for algae growth)
• Allows phosphate content to be lowered to 0.01 mg/l*2
• Easy and safe cartridge replacement – screw-on hose connections included
• Can be installed in or out of the pond
• Can be retrofitted in all swimming ponds and natural ponds in conjunction with 12 V pumps from OASE
• Optimal for a flow of between 300 l/h and 3300 l/h. Recommendation: A flow rate of 300 l/h for each 10 m³ of pond volume.
• To select the right pump, a pressure loss through the cartridge of only about 3 m should be considered.
• Also suitable for use in classic swimming pools and fountain pools – algae prevention reduces the need for disinfectants
• Sustainably and safely binds phosphates

Highly-reactive phosphate binder for effective algae prevention.