Oase Vitronic 36W Spare Parts
Oase Vitronic 36W Spare Parts
This a full list of spares for the Oase Vitronic 36w. Please see the diagram and part number and select the number in the drop down box. Read more
Parts:
- 1 Oase Vitronic 36w Ballast Unit 35840
- 2 Oase Vitronic 36w Replacement Bulb 55432
- 3 Oase Vitronic 36w Replacement Quartz 21763
- 4 Oase Vitronic 36w Clip And Bolt Sealing Kit 15748
- 5 Oase Vitronic 36w Replacement Body 22206
- 6 Oase Vitronic 36w Spare Part Set 35877
- 7 Oase Vitronic 36w Flat gasket hose tail 1 1/2″ 19491
- 8 Oase Vitronic 36w Cap nut 20 mm G 1 1/2″ 15445
Oase Vitronic 55W Spare Parts
Oase Vitronic 55W Spare Parts
This a full list of spares for the Oase Vitronic 55w. Please see the diagram and part number and select the number in the drop down box. Read more
Parts:
- 1 Oase Vitronic 55w Ballast Unit 35841
- 2 Oase Vitronic 55w Replacement Bulb 56636
- 3 Oase Vitronic 55w Replacement Quartz 13331
- 4 Oase Vitronic 55w Clip And Bolt Sealing Kit 15748
- 5 Oase Vitronic 55w Replacement Body 35797
- 6 Oase Vitronic 55w Spare Part Set 35877
- 7 Oase Vitronic 55w O-Ring NBR 40 x 3 SH70 A 3555
- 8 Oase Vitronic 55w Inspection glass Vitronic 29421
- 9 Oase Vitronic 55w Coupling nut 1 1/2″ 12096
Oase Water level Sensor 20-3
Oase Water level Sensor 20-3
OASE water-level sensors ensure reliable control of the water level and thus prevent the pool from overflowing. The Water-Level Sensor 2000-3/5 is designed for greater level differences of approximately 50 to 2000 mm, such as occur in water reservoirs. The stainless steel housings of the Water-Level Sensor 20-3 and 20-4 also take on the function of the common electrode. The minimum and maximum electrodes are in the housing. The permanently set level difference is 20 mm. In addition the 20-4 has a dry-run protection electrode.
It can be retrofitted with a dry run protection electrode. The electrodes can be adjusted according to the level differences via the cable length. They give switch on and switch off commands to regulate the water level or to protect the pump technology (Supplemental electrode 2000-1). Read more
Replacement Activating Rods For HI Blow Air Pumps
Replacement Activating Rods For HI Blow Air Pumps
The Replacement Activating Rods For HI Blow Air Pumps are available for the whole range of Hi Blows. We advise for all air stone and airlines running off any air pump to be fitted with a anti syphon non return valve, especially if the Pump is to be placed below the level of the surface of the pond water, as this will prevent any water from siphoning back and damaging the Pump. Read more
Replacement Air Filters For HI Blow Air Pumps
Replacement Air Filters For HI Blow Air Pumps
The Replacement Air Filters For HI Blow Air Pumps are available for the whole range of Hi Blows. Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pumps flow up to 30% and cause possible overheating. Read more
Replacement Diaphragms For HI Blow 100/120
Replacement Diaphragms For HI Blow 100/120
This is a pair of diaphragms mounting blocks for the HP100 or the HP120. Both diaphragms should be replaced at the same time. We advise for all air stone and airlines running off any air pump to be fitted with a anti syphon non return valve, especially if the Pump is to be placed below the level of the surface of the pond water, as this will prevent any water from siphoning back and damaging the Pump. Read more
Replacement Diaphragms For HI Blow 20
Replacement Diaphragms For HI Blow 20
This is a pair of diaphragms mounting blocks for the HP20. Both diaphragms should be replaced at the same time. We advise for all air stone and airlines running off any air pump to be fitted with a anti syphon non return valve, especially if the Pump is to be placed below the level of the surface of the pond water, as this will prevent any water from siphoning back and damaging the Pump.
Replacement Diaphragms For HI Blow 200
Replacement Diaphragms For HI Blow 200
This is a pair of diaphragms mounting blocks for the HP 200. Both diaphragms should be replaced at the same time. We advise for all air stone and airlines running off any air pump to be fitted with a anti syphon non return valve, especially if the Pump is to be placed below the level of the surface of the pond water, as this will prevent any water from siphoning back and damaging the Pump. Read more
Replacement Diaphragms For HI Blow 40
Replacement Diaphragms For HI Blow 40
This is a pair of diaphragms mounting blocks for the HP40. Both diaphragms should be replaced at the same time. We advise for all air stone and airlines running off any air pump to be fitted with a anti syphon non return valve, especially if the Pump is to be placed below the level of the surface of the pond water, as this will prevent any water from siphoning back and damaging the Pump. Read more
Replacement Diaphragms For HI Blow 60/80
Replacement Diaphragms For HI Blow 60/80
This is a pair of diaphragms mounting blocks for the HP60 or the HP80. Both diaphragms should be replaced at the same time. We advise for all air stone and airlines running off any air pump to be fitted with a anti syphon non return valve, especially if the Pump is to be placed below the level of the surface of the pond water, as this will prevent any water from siphoning back and damaging the Pump. Read more
Replacement Electrics For TMC Pro Pond UV 110
Replacement Electrics For TMC Pro Pond UV 110
The TMC Pro Pond 110 watt replacement electric packs are supplied all pre-wired and ready to use. They are supplied with 3 metres of power cable and come with the white end caps pre fitted with outer blue cover. The TMC Pro Pond 110 watt replacement electric packs cables numbered and colour coded for ease of installation. Read more
Replacement Electro Magnets For HI Blow Air Pumps
Replacement Electro Magnets For HI Blow Air Pumps
The Replacement Electro Magnets For HI Blow Air Pumps are available for the whole range of Hi Blows. We advise for all air stone and airlines running off any air pump to be fitted with a anti syphon non return valve, especially if the Pump is to be placed below the level of the surface of the pond water, as this will prevent any water from siphoning back and damaging the Pump. Read more
Replacement Inlet & Exhaust Casing Set For Hi Blows
Replacement Inlet & Exhaust Casing Set For Hi Blows
The Replacement Inlet & Exhaust Casing Set For Hi Blows are available for the whole range of Hi Blows. We advise for all air stone and airlines running off any air pump to be fitted with a anti syphon non return valve, especially if the Pump is to be placed below the level of the surface of the pond water, as this will prevent any water from siphoning back and damaging the Pump. Read more
Replacement Lamp For T5 Submersible 75W UVC – Red End
Replacement Lamp For T5 Submersible 75W UVC – Red End
These are genuine Replacement Lamp For T5 Submersible 75W UVC – Red End. This is one of the most integral parts of your overall filtration system, yet we often forget to maintain it as time goes by. You should replace the UV lamp in your UV unit every year. Although the lamp may still burn, it no longer emits the right UV radiation. Read more
Suitable For:
- X-Clear Budgetflex T5 75w
- X-Clear Ultraflex T5 75w
- T5 Submersible 75w
Replacement Quartz Sleeve For EazyPod UV
Replacement Quartz Sleeve For EazyPod UV
This is a genuine Evolution Aqua EazyPod Replacement Quartz Sleeve for use with the Evolution Aqua EazyPod UV Automatic, EazyPod Complete models and Surge filters. Read more
Replacement Safety Pin For HI Blow HP Air Pumps
Replacement Safety Pin For HI Blow HP Air Pumps
The Replacement Safety Pin For HI Blow HP Air Pumps are available for the whole range of Hi Blow air pumps. Read more
Superfish Koi Flow Service Kits
Superfish Koi Flow Service Kits
These are genuine Replacement Complete Service Kits For Superfish Koi Flow Air Pumps. Read more
Available For:
- Koi Flow 20
- Koi Flow 30
- Koi Flow 60
Surge Inlet Clear Hosetail
Surge Inlet Clear Hosetail
This Surge Inlet Clear Hosetail is a genuine Evolution Aqua replacement part. This is to be used in conjunction with the Evolution Aqua Surge Filter. Read more
Surge Waste Valve Assembly
Surge Waste Valve Assembly
This is a genuine Evolution Aqua Surge Waste Valve Assembly replacement part and is suitable for the Evolution Aqua Surge Filter. Read more
T5 Submersible 40-75W UVC Replacement Quartz Sleeve
T5 Submersible 40-75W UVC Replacement Quartz Sleeve
T5 Submersible 40-75W UVC Replacement Quartz Sleeve insulates the lamp from the water, allowing the lamp to operate at the optimum performance. The ultraviolet lamp will remain independent of the flow of water. Quartz is extremely transparent over a wide spectral range, with a low coefficient of thermal expansion and quartz is resistant to scratching and thermal shock. Fused quartz is made from crushing and melting natural materials. The purity of quartz is paramount to the efficiency of the lamp and sleeve. Read more
Suitable for the 40w and 75w
T5 Submersible 40W UVC Replacement Bulb
T5 Submersible 40W UVC Replacement Bulb
These are genuine Replacement Lamp For T5 Submersible 40W UVC – Red End. This is one of the most integral parts of your overall filtration system, yet we often forget to maintain it as time goes by. You should replace the UV lamp in your UV unit every year. Although the lamp may still burn, it no longer emits the right UV radiation. Read more
T5 Submersible Replacement Ballasts
T5 Submersible Replacement Ballasts
The T5 Submersible Replacement Ballasts are available for both the 75w and the 40w units. These are genuine replacement ballasts. Read more
Available For:
- 40w
- 75w
Tempest Waste Valve Assembly
Tempest Waste Valve Assembly
This is a genuine Evolution Aqua replacement part and is suitable for the new upgraded Evolution Aqua Tempest or can be retrofitted with the previous Tempest version. Read more
New Tempest Waste Valve Assembly:
- Robust and reliable double union ball valves
- Handle can be used to adjust the tightness of the seal
- New air inlet with valve for better control and reliability
- Can be retrofitted to the existing and upgraded Tempest model
TMC Pro Clear UVC Ballast Replacement 30w/55w
TMC Pro Clear UVC Ballast Replacement 30w/55w
These are genuine TMC Pro Clear UVC Ballast Replacement 30w/55w. We have a wide range of spare parts available. Read more
TMC Pro Pond UV Quartz Sleeves
TMC Pro Pond UV Quartz Sleeves
For those Koi and pond enthusiasts who are not as careful as they might be, we do also sell the spare TMC Pro Pond UV Quartz Sleeves in the most standard sizes.
The TMC Pro Pond UV Quartz Sleeve insulates the lamp from the water, allowing the lamp to operate at the optimum performance.
The ultraviolet lamp will remain independent of the flow of water. The TMC Pro Pond UV Quartz Sleeves are of open ended construction and are made from pure fused quartz.
Quartz is extremely transparent over a wide spectral range, with a low coefficient of thermal expansion and quartz is resistant to scratching and thermal shock. Fused quartz is made form crushing and melting natural materials. The purity of quartz is paramount to the efficiency of the lamp and sleeve.
TMC Quartz Sleeve Dimensions:
15w/25w
- Overall length 415mm
- External diameter 30mm
- Internal diameter 27mm
30w/55w
- Overall length 870mm
- External diameter 30mm
- Internal diameter 27mm
TMC UV Replacement Bulbs
TMC UV Replacement Bulbs
The TMC Replacement UV Bulbs are available for the whole range of the TMC pond UV clarifiers. The T8 Bulbs are available in 2 different wattages with the 110w model requiring 2x 55w Bulbs. Since the UVC clarifier is mostly in constant use, the effect can wear off it is therefore recommended that the lamps be replaced at regular intervals. It is best to think about this in spring so that your clarifier is ready for the whole pond season. Read more
Sizes Available:
- 30w Bulb Length 892mm
- 55w Bulb Length 892mm
- 110w Bulb Length 2x 892mm
Please Note these are NOT Genuine TMC Bulbs they are Phillips
Valterra Slide Valve Replacement Washers
Valterra Slide Valve Replacement Washers
The Valterra Slide Valve Replacement Washers are sold singly. These are available in 4″/110mm, 3″, 2″ and 1.5″. Unfortunately after time the seals in the slide valves tend to leak and need to be replaced. Read more
Sold individually
Yamitsu Algae Master Pond UV Clarifier Replacement Electrics
Yamitsu Algae Master Pond UV Clarifier Replacement Electrics
The Yamitsu Algae Master Pond UV Clarifier Replacement Electrics ensures your Yamitsu Algae Master UV filter operates at peak performance with the Replacement Electric Pack. Designed specifically for the Yamitsu Algae Master range, this high-quality electrical pack is an essential component to maintain the efficiency and reliability of your algae control system. Read more
Features:
- Direct Replacement: Compatible with all Yamitsu Algae Master models, making it easy to swap out the old unit and restore full functionality.
- Enhanced Durability: Built to last, providing consistent power to your UV filter for optimal algae removal.
- Easy Installation: Simple, user-friendly design for quick and hassle-free replacement.
-
Reliable Performance: Helps ensure your system runs smoothly, improving water clarity and preventing algae build-up.
Keep your filtration system working like new by replacing your electric pack when needed. Perfect for both routine maintenance and repairs, this replacement electric pack is an essential part of your aquarium or pond care kit.