RS Feeder Brackets

The Superfish Pond ECO Plus RC 20000 Pump is now available with remote control that enables you to easily adjust your pond pump flow capacity.

The remote control enables you to switch your pump on/off and set the water flow rate of your Superfish Pond ECO Plus RC 20000 Pump to the required level of flow rate. This is the most economical to run pond pump as the slower the flow rate, the less wattage your pump uses.

These great economic to run, energy efficient Superfish Pond ECO Plus RC 20000 Pumps are suitable for dry-mounting and submerged use.

• High water flow output with an extreme low energy consumption.
• Suitable for both submerged and dry standing usage.
• Run Dry Protection, when there is no water the pump stops automatically.

Run Dry and overload protection

The pump is equipped with Run Dry Protection, 10 seconds after being taken away from water, the water pump will stop to protect it from running dry, it will try to re start after 10 seconds, if without water, it will stop again, this cycle will repeat 5 times, then the pump will stop. To re-start the pump take plug from main and plug back in and ensure pump is working well.

The pump has a thermal overload safety device. In the event of any overheating of the motor, this device automatically switches off the pump. The cooling time is roughly 15 to 20 minutes, then the pump automatically comes on again. If the overload cutout is tripped, it is essential to identify and deal with the cause of the overheating.

Superfish Pond ECO Plus RC 20000 Performance

• 8000 l/h – 2.5m max head – 23 watt
• 8300 l/h – 2.7m max head – 30 watt
• 9100 l/h – 3.2m max head – 43 watt
• 10000 l/h – 3.7m max head – 51 watt
• 11000 l/h – 4.2m max head – 62 watt
• 11500 l/h – 4.7m max head – 75 watt
• 12000 l/h – 5.2m max head – 90 watt
• 12700 l/h – 5.7m max head – 105 watt
• 13300 l/h – 6.0m max head – 115 watt
• 15000 l/h – 6.5m max head – 130 watt

Complete with 2 year manufacturer warranty.

Oase Professional Pond Test Kit

The Oase Professional Pond Test Kit for water analysis determines the eight most important water parameters: the pH value, the water hardness, the carbonate hardness as well as the content of nitrogen dioxide, nitrate, chlorine, phosphate, ammonium and ammonia. The set includes high-quality measurement reagents, a durability control solution, laboratory-grade glass ampoules and water-repellent color charts. The interpretation aids for the measurement results facilitate the evaluation of the analysis, and the corresponding product recommendations provide possible treatment options.

Set Includes:

• pH value x 100 Tests
• Total Hardness (GH) x 100 Tests
• Carbonate Hardness (KH) x 100 Tests
• Ammonium/Ammonia (NH4/NH3) x 50 Tests
• Nitrite (N02) x 20 Tests
• Nitrate (NO3) x 20 Tests
• Phosphate (PO4) x 30 Tests
• Syringe, glass curvettes, colour charts and full instructions

Colombo pH pond test kit

Colombo pH pond test kit, pH is a measure of how acidic your pond water is. Fish do not like fluctuating pH levels, and some need to be kept at specific pH levels.

The only way to determine the pH of the water is with a Test kit

The only way to know what the Ph level is, is by testing the water with an Ph test kit. Regular testing, especially in new ponds, will prevent damage caused by low pH.

Colombo pH Pond Test Kit contains 40 tests.

Superfish ECO-plus E 8000

• Flow rate 8000 ltrs an hr.
• 41w Power consumption.
• Pumps large quantities of pond water with very low electricity consumption.
• Superfish ECO-plus E 8000 is for Koi and Fish ponds with low energy consumption.
• The Superfish ECO-plus E 8000 is extremely reliable in operation.

Electronic Filter pump for Koi and fish ponds. The new engine offers very good performance and high head at a very low power consumption (approx. 5 Watt per 1.000 L/h).

A pond pump that truly deserves a “green label”!

Run Dry and overload protection

The Superfish ECO-plus E 8000 pump is equipped with Run Dry Protection, 10 seconds after being taken away from water, the water pump will stop to protect it from running dry, it will try to re start after 10 seconds, if without water, it will stop again, this cycle will repeat 5 times, then the pump will stop. To re-start the pump take plug from main and plug back in and ensure pump is working well.

The pump has a thermal overload safety device. In the event of any overheating of the motor, this device automatically switches off the pump. The cooling time is roughly 15 to 20 minutes, then the pump automatically comes on again. If the overload cutout is tripped, it is essential to identify and deal with the cause of the overheating.