Water Purifier Replacement Carbon

OASE PhosLess Flow 3000 Cartridge

The filter cartridges from the flow cartridge system use phosphate-storing materials to quickly and effectively remove algae-causing phosphates from the pond water. The phosphate content is lowered below the growth limit for algae thus preventing the growth of algae. An increase in phosphates, for example, due to a bath in the swimming pond or natural pool, are collected immediately. Ultra-smooth glass beads on both sides and the matched cartridge design distribute the water flow around the centrally filled granulate and ensure an optimal storage result.

Phosphate binder cartridge for reduction of high phosphate values.

• POWERFUL: Has a total binding capacity of up to 90 g of phosphate PO43-

• SPECIAL GRANULATE: The binder absorbs available phosphate quickly and effectively, even at concentrations as low as 0.035 mg/l & (minimum level for algae growth)

• IDEAL: Perfect for starting at phosphate values greater than 0.2 mg/l PO43-

Aquaforte Phospat 3

Phosphate is one of the main nutrients for algae (blanket weed) in a pond. With these filter cartridges it is possible to keep the phosphate level below 0,035 mg/l! This is the “magic” limit that is too low for algae to grow but does not harm plants and bacteria. When the cartridge is saturated it must be replaced (re-filling or regenerating is not possible). A great advantage compared to other phosphate binding products is that the Phospat does not release the phosphate at all! The phosphate binding capacities of the Phospat cartridges is 30-100 times more compared to Iron (III) oxides.

– Reduces phosphate in water and supports the biofilter

– Suitable for ponds, natural pools, fountains and circulation wells

– Adsorption capacity is approximately 90.000 mg (Phospat 1) or 270.000 mg (Phospat 3) phosphate

– Flow rate up to 1100 l/h (Phospat 1) or 3300 l/h (Phospat 3)

– Defined particle size of the individual layers

– Suitable for up to ±50m³ (Phospat 1) or 150m³ (Phospat 3)

– Several PHOSPATs can be combined for larger volumes of water

– The Phospat should be protected against contamination with appropriate pre-filtration

– Max. working pressure: Phospat 1: 6 bar, Phospat 3: 4 ba

These are 2″ female thread

Kockney Koi Complete Wall Mounted Pre-Filter Kit

The Kockney Koi Complete Wall Mounted Pre-Filter Kit for water purifiers contains everything you need to attach it to your kockney koi water purifier.

Kit contains:

• Pre-Filter House
• 5 Micron Sediment filter
• Wall Mounting kit with screws
• Wrench
• 2 x Threaded connectors
• Metal connection hose to connect the purifier to the pre-filter